Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA207 ; Fri, 29 Jan 93 13:00:37 EST Newsgroups: comp.unix.bsd Path: sserve!manuel.anu.edu.au!munnari.oz.au!uniwa!cujo!ken From: ken@cujo.curtin.edu.au (Ken Taylor) Subject: [386bsd] Getting Disk Geometry Message-ID: <1993Jan29.011400.5934@cujo.curtin.edu.au> Organization: Curtin University of Technology X-Newsreader: TIN [version 1.1 PL7] Date: Fri, 29 Jan 1993 01:14:00 GMT Lines: 19 Is there an easy way of getting disk geometries for adding a second disk to 386bsd (as the initial install program obviously does as there is no /etc/disktab entry for my first drive).. I have a Conner 210Mb disk as the master and a small 40Mb Seagate which I hope to use for some swap and a bit of spare disk... BTW - can someone also describe how to install swap in some detail.. Especially if my swap is on the second disk.. Thanks Ken -- Ken Taylor | "I have a friend who's seen inside my tiny brain ken@cujo.curtin.edu.au | He's seen the aging and the mildew from the rain Curtin University | And he does what he can to keep on top of every Perth, W. Australia | one of them" - Happy Rhodes