Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA288 ; Sun, 31 Jan 93 14:01:22 EST Newsgroups: comp.unix.bsd Path: sserve!manuel.anu.edu.au!munnari.oz.au!spool.mu.edu!howland.reston.ans.net!bogus.sura.net!udel!gatech!emory!sol.ctr.columbia.edu!hamblin.math.byu.edu!news.byu.edu!ux1!fcom.cc.utah.edu!park.uvcc.edu!ns.novell.com!thisbe.Eng.Sandy.Novell.COM!terry From: terry@thisbe.Eng.Sandy.Novell.COM (Terry Lambert) Subject: Re: [386BSD] Jemini 486 tower panics booting dist diskette 0.1 and patch 0.2 Message-ID: <C1MKD7.Ct8@Novell.COM> Keywords: 386bsd, panic Sender: usenet@Novell.COM (Usenet News) Nntp-Posting-Host: thisbe.eng.sandy.novell.com Organization: Novell NPD -- Sandy, UT References: <C1L4L7.214@unix.portal.com> Date: Fri, 29 Jan 1993 16:55:55 GMT Lines: 40 In article <C1L4L7.214@unix.portal.com> schuler@shell.portal.com (Carlos Alejandro Schuler) writes: >this is the message i get, > >trap 19 code = 0 eip = fe000771 cs = 8 eflags = 2 cr2 0 cpl ffffffff >panic: trap >hit reset key > >Any clues? The same disk boots fine on other 386 and 486 machines. >From Frank Durda IV's trap list: ] Trap 16 Coprocessor Error ] The coprocessor asserted the ERROR# input pin on the 386 ] (internal on the 486) ] ] ] Trap 17 Alignment Check (486 and later) ] If enabled, this trap will occur if a data fetch does not ] occur on a word boundary. I don't know of any software that ] activates this feature yet. I have seen SCO UNIX get this ] error on early Cyrix processors, even though SCO had not ] enabled the feature. ] ] ] Trap 18-32 (reserved) ] ] All this information and more can be found in the variuous programmers ] references from Intel and other compatible chip vendors. You got a reserved one. Try a lower clock rate, and if that works, faster memory or more wait states. Terry Lambert terry@icarus.weber.edu terry_lambert@novell.com --- Disclaimer: Any opinions in this posting are my own and not those of my present or previous employers.