Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA496 ; Wed, 03 Feb 93 19:01:44 EST Newsgroups: comp.unix.bsd Path: sserve!manuel.anu.edu.au!munnari.oz.au!sgiblab!sdd.hp.com!ncr-sd!ncrcae!ncrhub2!torynews!eae From: eae@TorreyPinesCA.ncr.com (Eric Evans 3573) Subject: system hang with cgd's com-beta? Message-ID: <1993Feb2.180511.25490@TorreyPinesCA.ncr.com> Organization: NCR (Torrey Pines Development Center) Disclaimer: This posting does not necessarily reflect the opinions of NCR. Date: Tue, 2 Feb 93 18:05:11 GMT Lines: 22 I just installed Chris Demetriou com-beta in an attempt to solve some of my serial woes and am getting a system hang when an open() is attempted on one of the com ports. My com card is standard (16450) and it did work prior to adding com-beta (just not as well as I'd like, works fine from dos). I started from 0.1 dist with the 0.2 patches then added com-beta without any problem. Now any access (comcontrol or tip) to the /dev/tty00 hangs the system. I have turned on COM_IGNOREFIFO, COM_MULTIPORT, COM_BIDIR in my config and used a device line of device com0 at isa? port "IO_COM1" tty irq 4 vector comintr Any ideas? Eric --------------------------------------------------------------------------- Eric Evans arpa: eric.evans@torreypinesca.NCR.COM uucp:...!ucsd!ncrtory!eae ===========================================================================