Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA1523 ; Tue, 23 Feb 93 14:46:57 EST Xref: sserve comp.unix.bsd:11348 comp.os.386bsd.questions:9 Newsgroups: comp.unix.bsd,comp.os.386bsd.questions,comp.os.386bsd.bugs Path: sserve!manuel.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!haven.umd.edu!darwin.sura.net!convex!constellation!sleeper!quentin From: quentin@sleeper.uucp (Quentin Conner) Subject: Re: Adaptec 1542B: panic:kmem_malloc: kmem_map too small Message-ID: <C2M8HE.J31@sleeper.uucp> Organization: Indepth Data Inc. X-Newsreader: TIN [version 1.1 PL8] References: <scott.729547054@pita> Date: Wed, 17 Feb 1993 23:12:48 GMT Lines: 26 I also get the error panic: kmem_malloc: kmem_map too small but upon booting with a new 300MB SCSI attached. I edited i386/include/param.h and doubled the size of the kmem map but same problem. It happens with 0.1 dist and 0.1 PL58. I have two esdi drives as the primary and an Adaptec 1542B as secondary controller. I have run a Toshiba 3301 off the adaptec sucessfully, but when I try to boot with either this 300MB scsi or a 1GB scsi, I get the panic. Have not tried the "julian scsi driver" nor have i tried a straightforward "scsi only" installation without the ESDI disks. Anybody have any ideas? I will cross-post to the *new* groups comp.os.386bsd.questions and comp.os.386bsd.bugs. Quentin Conner -------------- sleeper!quentin@kittyhawk.ecn.uoknor.edu or sleeper!quentin@occrsh.att.com or ...!kittyhawk.ecn.uoknor.edu!sleeper!quentin or ...!uunet!att!occrsh!sleeper!quentin -- Quentin Conner -------------- sleeper!quentin@kittyhawk.ecn.uoknor.edu or sleeper!quentin@occrsh.att.com