Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!howland.reston.ans.net!europa.eng.gtefsd.com!uunet!dove!cme!sst170.ncsl.nist.gov!schnee From: schnee@sst170.ncsl.nist.gov (Rick Schneeman) Newsgroups: comp.os.386bsd.questions Subject: NetBSD 0.9 and ed0 driver Message-ID: <22673@durer.cme.nist.gov> Date: 25 Aug 93 14:27:33 GMT Sender: news@cme.nist.gov Lines: 16 Nntp-Posting-Host: sst170.ncsl.nist.gov X-Newsreader: TIN [version 1.2 PL1] I can't seem to get the ed0 driver for the 3C503 driver to be seen on boot. Therefore, I can't ifconfig for NFS install. First problem is that INSTALL docs need to be updated to reflect the fact that the 3C503 board does not contain a 0xd0000 io address but more like a 0xd8000 address. This however still does not hit the board on boot. Plus I have tried several other io and base addresses but to no avail. The ed0 driver is a superb bit of work and I would like to be able to use it in 0.9; I installed it in 0.8 and was thoroughly impressed - anyone have any help here??? -- ============================================================================= Richard D. Schneeman rschneeman@nist.gov National Institute of Standards and Technology (NIST) Computer Systems Lab, Technology Building, MS-B266 Gaithersburg, MD 20899 USA =============================================================================