Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!howland.reston.ans.net!usc!cs.utexas.edu!uunet!psinntp!dsh!gary From: gary@dragon.dsh.org (Gary D. Duzan) Subject: Re: [NetBSD-0.9] Possible problem with if_ed driver Organization: Delaware State Hospital References: <2715f6$72v@mudos.pc.cc.cmu.edu> Message-ID: <CDAt3K.AI@dragon.dsh.org> Date: Mon, 13 Sep 1993 15:16:30 GMT Lines: 26 In article <2715f6$72v@mudos.pc.cc.cmu.edu> mju@mudos.pc.cc.cmu.edu (Marc Unangst) writes: =>I'm using NetBSD 0.9 with an SMC Elite 16T and the ed0 driver. =>The "device ed0" line reads as follows: => =>device ed0 at isa? port 0x240 net irq 10 iomem 0xcc000 vector edintr => =>When my machine boots, the if_ed driver registers like this: => =>Sep 12 19:49:04 mudos /netbsd: ed0 at 0x240-0x25f irq 10 maddr 0xcc000-0xcdfff on isa =>Sep 12 19:49:04 mudos /netbsd: ed0: address 00:00:c0:93:78:5a, type unknown (8bit) => =>The second line is the one I'm concerned about; it appears as if =>the driver isn't correctly recognizing the card type, and so is only =>using 8K of RAM and running the card in 8-bit mode. The card =>appears to work fine, but what's going on here? => I get the same thing with that card. 386BSD + pk0.2.0 still thinks it's a Starnet card, but it also works. Gary D. Duzan Network Administrator Delaware State Hospital