Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!elroy.jpl.nasa.gov!usc!howland.reston.ans.net!xlink.net!math.fu-berlin.de!knock1.mgh.harvard.edu!rickrac From: rickrac@knock1.mgh.harvard.edu (Jimmy Rearick) Subject: Re: ed0: device timeout Message-ID: <IMVHBZ3J@math.fu-berlin.de> Sender: news@math.fu-berlin.de (Math Department) Nntp-Posting-Host: knock1.mgh.harvard.edu Organization: Mass General Hospital, Boston References: <CECCBt.HCn@agora.rain.com> Date: Mon, 4 Oct 1993 03:17:20 GMT Lines: 16 >>My only other theory was that I had the IRQ set wrong (set by a jumper >>jon the WD8003 and I have no doco so I'm guessing. If anyone has docs >>for an old 8bit WD8003E please mail me). I believe that the IRQ for >>the 3C503 is set by software though. If correct then this theory dies >>too. >Yup, that's the problem. Why do you mention the 3c503? I don't recall >anybody bringing this up in the past. I'm using the 3c503 and the irq is software config why would there be a problem with the irq? -Jim