Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!elroy.jpl.nasa.gov!usc!sol.ctr.columbia.edu!destroyer!news.itd.umich.edu!tiamat.umd.umich.edu!crt From: crt@tiamat.umd.umich.edu (Rob Shady) Newsgroups: comp.os.386bsd.bugs Subject: SCSI Drive problems with NetBSD 0.9 Date: 4 Oct 1993 12:43:30 -0400 Organization: Univerisity of Michigan - Dearborn Lines: 10 Message-ID: <crt.749752807@tiamat.umd.umich.edu> NNTP-Posting-Host: cw-u02.umd.umich.edu I recently decided to grab some SCSI stuff for my BSD box, to start with I wanted to setup a 200 MB partition for files/news/etc. I purchased the Adaptec 1542C controller card, and a SCSI drive. I tested the drive under DOS to make sure it works, and it works just dandy.. I threw the drive on my system (supposedly configured for SCSI & Adaptec 1542 cards) and it doesn't work. Ie: When I boot, the kernel finds the drive, identifies it properly, etc. But when I try to run Disklabel on the drive, it tells me that the device is not configured?!?!? -- Rob