Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!comp.vuw.ac.nz!waikato!thebes.cc.waikato.ac.nz!hamish From: hamish@thebes.cc.waikato.ac.nz (Hamish Marson) Newsgroups: comp.os.386bsd.questions Subject: NetBSD 0.9 w/- Ultrastore 34f = No Work Date: 4 Oct 1993 21:40:17 GMT Organization: The University of Waikato Lines: 20 Message-ID: <28q581$12ra@thebes.cc.waikato.ac.nz> NNTP-Posting-Host: thebes.cc.waikato.ac.nz X-Newsreader: TIN [version 1.2 PL1] Hi all, I have been trying to install NetBSD on a 486 66Mhz DX2 with an ultrastore 34f, and it doesn't seem to want to work. The board is detected, and the correct parameters are read from the card, but then the system says that the board isn't responding, and stops, saying I should hit reset.... Is there anything special that should be done? The board is currently at 0x330, IRQ 11, DMA 5.... All the other jumpers are at default... The BIOS message lists the drives OK too.... -- ====================================================================== | Hamish Marson | | Systems Programmer | | | Computer Services | INTERNET h.marson@waikato.ac.nz | | University of Waikato | PHONE +64 7 8562889 xt 8181 | | New Zealand | FAX +64 7 8384066 | ===========Disclaimer :- Remember. You heard it here first.===========