Return to BSD News archive
Path: sserve!manuel!munnari.oz.au!mips!mips!darwin.sura.net!dtix!mimsy!nmrdc1!rdc30 From: rdc30@nmrdc1.nmrdc.nnmc.navy.mil (LCDR Michael E. Dobson) Newsgroups: comp.unix.bsd Subject: Re: install 0.1 problems Message-ID: <1992Jul22.152837.28279@nmrdc1.nmrdc.nnmc.navy.mil> Date: 22 Jul 92 15:28:37 GMT References: <1992Jul21.211019.6250@thyme.jpl.nasa.gov> <1992Jul21.224908.5459@nrao.edu> Organization: Naval Medical Research & Development Command Lines: 25 In article <1992Jul21.224908.5459@nrao.edu> cflatter@nrao.edu writes: >In article 6250@thyme.jpl.nasa.gov, kaleb@thyme.jpl.nasa.gov (Kaleb Keithley) writes: >> >>3. Would anyone "in the know" care to suggest when a fix for the bus >> mouse problem might be available. It's going to be a real drag >> to pull the card every time I want to switch. :-) I'm even offering >> to help to solve it, if I can surmount the above obstacles. > >Funny... I have a Logitech bus mouse installed and it didn't faze BSD at all. >You might check the jumpers on the mouse card --- you might be able to find >a configuration that works both with OS/2 and 386BSD. > When I booted Tiny on a machine with a Microsoft Bus Mouse on IRQ 5, it identified it as wt0 at 0x300 IRQ 5. Now I do have an Everex tape at that address on IRQ 2/9. However, booting up was fine. I haven't tried to install and run the full version on this box yet. > Chris Flatters > cflatter@nrao.edu -- LCDR Mike Dobson, Sys Admin for | Internet: rdc30@nmrdc1.nmrdc.nnmc.navy.mil nmrdc1.nmrdc.nnmc.navy.mil | UUCP: ...uunet!mimsy!nmrdc1!rdc30 AT&T 3B2/600G Sys V R 3.2.3 | BITNET: dobson@usuhsb or nrd0mxd@vmnmdsc WIN/TCP for 3B2 R3.2 | MCI-Mail: 377-2719 or 0003772719@mcimail.com