Return to BSD News archive
Newsgroups: comp.os.386bsd.bugs Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!sgiblab!swrinde!cs.utexas.edu!uunet!hearst.acc.Virginia.EDU!ruacad!rucs!bcolbert From: bcolbert@rucs2.sunlab.cs.runet.edu (Brad Colbert) Subject: Re: Dead com0 in NetBSD Message-ID: <CHMzLE.AAy@rucs2.sunlab.cs.runet.edu> Organization: Radford University X-Newsreader: TIN [version 1.2 PL0] References: <CHA4Iu.A5L@rucs2.sunlab.cs.runet.edu> <36094@ksr.com> <1993Dec2.004102.21003@diana.ocunix.on.ca> Date: Mon, 6 Dec 1993 23:22:25 GMT Lines: 89 In article <1993Dec2.004102.21003@diana.ocunix.on.ca> you wrote: : In article <36094@ksr.com> jfw@ksr.com (John F. Woods) writes: : >bcolbert@rucs2.sunlab.cs.runet.edu (Brad Colbert) writes: : >> My com0 is dead! I have tip correctly configured, I can tip com0 and : >> I can watch the lights on my modem blink, I can even dial out, but : >> tip doesnt display anything (the modem does have verbose and echo on). : >> When I try to quit tip (~.) it doesnt return me to my shell, it just : >> sits there in la-la land, I can type and it shows up on the screen but : I had a similar problem. The standard com driver in netbsd does : not deassert DTR long enough for some modems. Including the one : I was using. The modem doesn't drop carrier, tip then hangs : when you try to exit. I haven't tracked down where the standard : NetBSD com driver sets the DTR on/off times. I am using the patched : bidirectional driver and the DTR on/off times is directly modifiable : in that driver. I just bumped up the DTR on/off times in the driver. Im willing to try anything. Where did can I pick up this driver? : But the fact you aren't getting an echo from the modem sounds : not quite the same problem.... I'd double check the cable. If the modem : lights are blinking and you are dialing out, then you have : a modem control signal problem. i.e. Your modem is not seeing : CTS or something stupid like that even though (I assume) the : MSDOS comm package works. i.e. Just the way the com driver is working : under NetBSD. The MSDOS package works when I do a power-cycle. : >> no cammands are executed and nothing is sent to the modem (after trying : >> to quit). On a soft-reboot I selected MS-DOS as the os and tried one : >> of my communication programs and th same thing happend. Not till I did : >> a hard-boot did I get moy com port back in DOS. : I'd be curious what happens when you boot MS-DOS and power cycle : just the modem to force it to drop DCD. I hope for your sake : it isn't an infernal (internal) modem. I _hate_ those things, : for this very problem. You'd also not have a problem with : cables either. :-) Of course, you do mention the blinking lights : so it isn't right? i havnt tried this... oh By the way, its the same for com1 (tty01) and I cant get anything out of my mouse, so I cant use X. ARARARARAGGGGHHH!! : ... : > : >Check the hardware configuration REAL HARD. That sounds a lot like what I : >saw when I had one of my serial ports misjumpered to interrupt on the wrong : >IRQ level. : Thats a very good possibility too. But Brad insists he got it right, : and that he "tried one of my communication programs and th : same thing happend. Not till I did a hard-boot did I get moy com : port back in DOS. " I assume he is saying he got his com port : to work under the MS-DOS communication program he mentions after : he hard-booted his PC. Hmmm, Im still going to check, Im also going to disable com2 com3 Com3 uses IRQ9 which is also used by my ethernet card (Im wondering if this could be the problem?) : However, the com driver would keep kicking characters out and keep trying : to restart the SIO transmit interrupts, but no characters would ever be : received (Since RX IRQ's would get tossed). John, your guess as to what : is wrong still sounds the most likely. Perhaps Brad's MSDOS comm : package is configured backwards. Brad, what does your MSDOS (working : I assume) comm package say the COM1 IRQ level is? Ill have to double check that and get back to you. : -- : Dyane Bruce db@diana.ocunix.on.ca : 29 Vanson Ave. Nepean On, K2E 6A9 So does anybody ever read : 613-225-9920 what's in this space? Thanks! -- -| bcolbert@rucs2.sunlab.cs.runet.edu |------------------------------------ | Where you come from is gone, where you thought you where going to never | | was there, and where you are is no good unless you can get away from it.| | Where is there a place for you to be? No place. | ---------------------------------------------------------------------F.O.-- -- -| bcolbert@rucs2.sunlab.cs.runet.edu |------------------------------------ | Where you come from is gone, where you thought you where going to never | | was there, and where you are is no good unless you can get away from it.| | Where is there a place for you to be? No place. |