Return to BSD News archive
Newsgroups: comp.os.386bsd.bugs Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!dog.ee.lbl.gov!newshub.nosc.mil!nosc!jadpc!jdeitch From: jdeitch@jadpc.cts.com (Jim Deitch) Subject: [ FreeBSD ] Trap type 12 when warmbooting only Message-ID: <CIF7H1.A12@jadpc.cts.com> Organization: J. Deitch & Associates, San Diego, CA. Date: Wed, 22 Dec 1993 05:05:25 GMT Lines: 37 I have an NCR model 3333 486-33. The system has a built-in IDE interface that is disabled and has no drives defined for it in the cmos. The system also has an Adaptec 1540CF with a Seagate st1980n drive. When the system boots up after I have configured the kernel to get rid of any extraneous devices I get an error message like this: RTC BIOS diagnostic error 8<fixed_disk> Then the system boots fine. When doing a warm reboot (sync;sync;reboot) here is what happens. The screen clears, I get the above error then the copyright mesage and then I get a nice error that reads: Trap Type 12 code=fdbf0000 eip=fe053da8 cs=fdbf0008 eflags=10246 cr2 0 cpl ffffffff trap:panic please press reset (The wording on line 3 & 4 might be different but the first and second line are correct). Anybody have any ideas where this might be coming from? The system has a SVGA VESA localbus card, 2 serial ports and a WD8003E ether card. There are no conflicts as all works after the system boots. Thanks, Jim P.S. Please e-mail as the news feed here really stinks. -- deitch@sima.san.mrms.navy.mil jdeitch@ns2.mrms.navy.mil (619)556-0332 -- INTERNET: jdeitch@jadpc.jd.com UUCP: nosc!jadpc!jdeitch FIDONET: Jim_Deitch@f723.n202.z1.fidonet.org (1:202/723)