Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!bunyip.cc.uq.oz.au!harbinger.cc.monash.edu.au!yeshua.marcam.com!news.kei.com!eff!usenet.ins.cwru.edu!agate!ames!koriel!sh.wide!wnoc-tyo-news!rena!cnvxjp!omnis.co.jp!specgw!tama!amurai
From: amurai@tama.spec.co.jp (Atsushi Murai)
Newsgroups: comp.os.386bsd.questions
Subject: Re: FreeBSD + Buslogic 545S help
Message-ID: <AMURAI.94Jan3233926@tama.spec.co.jp>
Date: 4 Jan 94 04:39:12 GMT
References: <jstCIyqAK.Fqv@netcom.com>
Sender: amurai@tama.specgw.co.jp (Atsushi Murai)
Organization: System Planning and Engineering Co.,Ltd
Lines: 32
In-Reply-To: jst@netcom.com's message of 1 Jan 94 18:06:20 GMT
In article <jstCIyqAK.Fqv@netcom.com> jst@netcom.com (Jason Thomasser) writes:
I am trying to get a buslogic 545S controller to work on my machine.
when the controller is installed the bios is recognizing the installed hard
disk and scsi tape unit. the kcopy-ah-floppy boots i then install the
filesystem floppy and when it probes the controller i see the following
messages:
<delete for bandwith>
Is there any thing special i need to do to the default settings that
come with the board? If anyone knows i'd appreciate the tip.
Ah, Could you write down your HardWare setups ?
Especially, 545S Bios will display the Bios/FirmWare Version when it
is enabled. If the Firm Ware version is exactly 3.30, you might need
to get New FirmWare ROM or Need to *special* hack to the driver soft;-)
thanks,
Always.
jason
*************** Jason Thomasser jst@netcom.com (408) 458-0379 ***************
* Enterprise Network Designs, Inc. P.O. Box 8532, Santa Cruz, CA 95061-8532 *
********** Contract Systems and Network Administration Services *************
Atsushi.
--
Atsushi Murai Email: amurai@spec.co.jp
System Planning and Engineering Co,.Ltd. Voice: +81-33833-5341