Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!constellation!news.uoknor.edu!ns1.nodak.edu!netnews.nwnet.net!news.uoregon.edu!cs.uoregon.edu!sgiblab!uhog.mit.edu!europa.eng.gtefsd.com!emory!cs.utk.edu!cs!cowell From: cowell@duncan.cs.utk.edu (Andrew Cowell) Newsgroups: comp.os.386bsd.questions Subject: NetBSD 0.9: drive not configured error on Seagt ST-02 w Conner cp3200f Date: 14 Jan 1994 17:50:15 GMT Organization: Computer Science Dept, University of Tennessee, Knoxville Lines: 18 Distribution: world Message-ID: <COWELL.94Jan14125015@duncan.cs.utk.edu> NNTP-Posting-Host: duncan.cs.utk.edu So I've gotten NetBSD 0.9 to boot fine on my machine (an old DTK 386), but every time I try to access the disk (i.e. disklabel, newfs, etc...) I get the error 'drive not configured.' I get this in the installation script even after entering the correct values for cylinders, etc... Has anyone experienced this problem, or can maybe offer some advice? (BTW, this setup doesn't work with Linux either (I tried), it always times out while accessing the disk) I never had any problems at all with DOS. Somebody please take pity on me and tell me the problem, I really want to get away from DOS! <:( Andy -- ............................................................................... Andrew E. B. Cowell <cowell@cs.utk.edu>| "A love like ours is rare." The University of Tennessee, Knoxville |"Plasma Twins," The Legendary Pink Dots