Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!foxhound.dsto.gov.au!fang.dsto.gov.au!yoyo.aarnet.edu.au!news.adelaide.edu.au!basser.cs.su.oz.au!news.cs.su.oz.au!metro!dmssyd.syd.dms.CSIRO.AU!dmsperth.per.dms.CSIRO.AU!uniwa!harbinger.cc.monash.edu.au!msuinfo!agate!howland.reston.ans.net!cs.utexas.edu!sdd.hp.com!nigel.msen.com!max.cybernet.com!jbell From: jbell@max.cybernet.com (J. Shan Bell) Newsgroups: comp.os.386bsd.questions Subject: Does the BusLogic 545S working with FreeBSD? Date: 3 Feb 1994 20:40:56 GMT Organization: Cybernet Systems Coporation Lines: 21 Sender: jbell@max.cybernet.com (Jeff (Shan) Bell) Distribution: world Message-ID: <2irngp$4rk@nigel.msen.com> NNTP-Posting-Host: 192.245.33.3 Keywords: BusLogic, SCSI, FreeBSD I originally was using an Adaptec 1542 but I ran into the > 16Mb of RAM problem. So I picked up a BusLogic 545S. With the same settings as the Adaptec it won't boot up. I set the AHADEBUG directive to get the following messages. What's going on here? Feb 3 12:26:52 spiffy /386bsd: aha0: aha_cmd, cmd/data port empty 3 Feb 3 12:26:52 spiffy /386bsd: aha0: inquire 7b, da, 6, fe Feb 3 12:26:52 spiffy /386bsd: aha0: reading board settings, dma=5 int=11 Feb 3 12:26:52 spiffy /386bsd: aha0 at 0x330 irq 11 drq 5 on isa Feb 3 12:26:52 spiffy /386bsd: aha0: cmd fail Feb 3 12:26:52 spiffy /386bsd: aha0: abort failed in wait Feb 3 12:26:52 spiffy /386bsd: aha0: MBO not free Feb 3 12:26:52 spiffy /386bsd: aha0: cmd fail Feb 3 12:26:52 spiffy /386bsd: aha0: abort failed in wait Feb 3 12:26:52 spiffy /386bsd: aha0: cmd fail Feb 3 12:26:52 spiffy /386bsd: aha0: abort failed in wait Thanks for any assistance. shan