Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!bunyip.cc.uq.oz.au!harbinger.cc.monash.edu.au!yeshua.marcam.com!MathWorks.Com!europa.eng.gtefsd.com!howland.reston.ans.net!usenet.ins.cwru.edu!nigel.msen.com!max.cybernet.com!jbell From: jbell@max.cybernet.com (J. Shan Bell) Newsgroups: comp.os.386bsd.questions Subject: [FreeBSD] Continued problems using BusLogic 445S Date: 24 Feb 1994 14:15:30 GMT Organization: Msen, Inc. -- Ann Arbor, Michigan Lines: 31 Distribution: world Message-ID: <2kicq2$7n4@nigel.msen.com> NNTP-Posting-Host: 192.245.33.3 Keywords: BusLogic, 445S, scsi, FreeBSD There have been a few reports recently on getting the BusLogic VLB 445S card working, but I still can't get the thing to boot with the bt driver using this card. I'm getting kernel panics when probs the card. The error is reported something like this. Fatal trap 19: non-maskable interrrupt trap while in kernel mode trap type = 19, code = 0 eip = fe05a04f, cs = 8, eflags = 202, cr2 = 0, current priority = ffffffff panic: non-maskable interrupt trap As was suggested by a couple of people, I tried chaning one of the two reserved switches and I also played with the BIOS settings. Someone who has it work: please give me a step by step on installing and booting with it. My system is a 486DX2 66V, Gateway with VLB. thanks, shan -- J. Shan Bell Cybernet Systems Corporation shan@cybernet.com Research and Development (313) 668-2567 Ann Arbor, MI