Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!munnari.oz.au!uunet!usc!howland.reston.ans.net!pipex!uknet!EU.net!ieunet!curia!usenet From: dave@odyssey.ucc.ie Subject: problems with mouse driver on a DEC PC Message-ID: <CMAIz2.1u3@curia.ucc.ie> Lines: 55 Sender: usenet@curia.ucc.ie Organization: University College Cork, Ireland Date: Mon, 7 Mar 1994 10:42:07 GMT Hi I am trying to get Xfree86 2.0 to work on a FreeBSD 1.02 box (a DEC PC LPv 466 d2). I am having problems with the mouse (a model PCXAS-AA - is this a logitech or microsoft ?). Anyway I downloaded a psmouse driver, but when I ran the new kernel it works ok (I had a problem with trying to use the reccomended line in the config file, as it seemed to have a conflict for the "IO_KBD" port. Anyway now it boots, but when I run X I get ... true% /usr/X386/bin/X XFree86 Version 2.0 / X Window System (protocol Version 11, revision 0, vendor release 5000) Operating System: FreeBSD Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) mmio_928, s3_generic Using syscons driver with X support (version 1.0) (using VT number 2) Xconfig: /usr/X386/lib/X11/Xconfig (**) stands for supplied, (--) stands for probed/default values (**) Mouse: type: Microsoft, device: /dev/psaux, baudrate: 1200 (**) FontPath set to "/usr/X386/lib/X11/fonts/misc/,/usr/X386/lib/X11/fonts/75dp i/" (--) S3: card type: 386/486 localbus (--) S3: chipset: 805 (--) S3: chipset driver: s3_generic (--) S3: videoram: 1024k (**) S3: clocks: 25.00 28.00 38.00 22.00 30.00 32.00 40.00 47.00 (**) S3: clocks: 50.00 56.00 75.00 44.00 59.00 64.00 80.00 90.00 (--) S3: Maximum allowed dot-clock: 110MHz (**) S3: Mode "1024x768": mode clock = 64.000, clock used = 64.000 (**) S3: Mode "640x480": mode clock = 25.000, clock used = 25.000 (**) S3: Virtual resolution set to 1024x768 (--) S3: Direct memory accessing has been disabled (--) S3: Pixmap cache: (--) S3: Using 2 128-pixel 4 64-pixel and 8 32-pixel slots (--) S3: Using 8 pages of 768x255 for font caching Fatal server error: Cannot open mouse (Device not configured) obviously I have the wrong driver, or else I configured it incorrectly, can someone confirm what mouse driver I should use if I have the right driver, I will mail about the configuration ... thanks in advance dave (dave@odyssey.ucc.ie)