*BSD News Article 29287


Return to BSD News archive

Newsgroups: comp.os.386bsd.questions
Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!yeshua.marcam.com!MathWorks.Com!europa.eng.gtefsd.com!howland.reston.ans.net!pipex!sunic!ericom!ericom!etldncn
From: etldncn@paddington.ericsson.se ( )
Subject: Mitsumi + FreeBSD = Arghhhhh
Message-ID: <ETLDNCN.94Apr7094928@paddington.ericsson.se>
Sender: news@ericsson.se
Nntp-Posting-Host: paddington.ericsson.se
Organization: Ericsson Ltd., Cellular Systems & Special Networks.
Date: Thu, 7 Apr 1994 08:49:28 GMT
Lines: 129


Hi BSD fans,


I hope that some kind soul can help me with a problem that I have with
my new Mitsumi drive. I have set up my Mitsumi drive with the
following parameters.

Int = 5
IO  = h300
DMA = 7

In DOS things work fine. This is my config.sys 

DEVICE=C:\DOS\HIMEM.SYS /testmem:off
DEVICE=C:\DOS\EMM386.EXE NOEMS
BUFFERS=30,0
FILES=30
dos=UMB
LASTDRIVE=Z
fcbs=16,8
dos=high
country=044,,c:\dos\country.sys
SHELL=C:\DOS\COMMAND.COM C:\DOS\  /p
STACKS=9,256
DEVICEHIGH /L:2,20848 =\DOS\MTMCDE.SYS /D:MSCD001 /P:300 /A:0 /M:20 /T:7 /I:5 /X


 I have recompiled my kernel in FreeBSD and all I get when I boot is...


 mcd0 not found at 0x300

 Of course when I attempt to mount the drive I get 'device not
 configured' :-(

 This is my Kernel config... 

#
#

machine		"i386"
cpu		"I386_CPU"
cpu		"I486_CPU"
ident		DUNCAN
timezone	8 dst
maxusers	10
maxfdescs	2048			#Max file descriptors per process
options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		ISOFS			#ISO File System
options		NFS			#Network File System
options		PCFS			#MSDOS File System
options		"COMPAT_43"		#Compatible with BSD 4.3
options		"TCP_COMPAT_42"		#TCP/IP compatible with 4.2
options		XSERVER			#Xserver
options		UCONSOLE		#X Console support
options		GATEWAY			#Host is a Gateway (forwards packets)

config		"386bsd"	root on wd0 swap on wd0 and sd0

controller	isa0

controller	fd0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fd0 drive 0
disk		fd1	at fd0 drive 1

controller	wd0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wd0 drive 0
disk		wd1	at wd0 drive 1

controller	aha0	at isa? port "IO_AHA0" bio irq 11 drq 5 vector ahaintr
controller	scbus0

device		sd0
device		sd1
device		sd2
device		sd3

# device		st0
# device		st1

#device		cd0	#Only need one of these, the code dynamically grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device		mcd0	at isa? port 0x300 bio irq 5 vector mcdintr

device		pc0	at isa? port "IO_KBD" tty irq 1 vector pcrint
device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

#For high speed serial lines.
device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
#device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
#device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

#device		lpt0	at isa? port "IO_LPT1" tty irq 7 vector lptintr
device		lpa0	at isa? port "IO_LPT1" tty
#device		lpa1	at isa? port "IO_LPT2" tty

device ed0 at isa? port 0x280 net irq 9 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	2
pseudo-device	pty	12
pseudo-device	speaker

pseudo-device	swappager
pseudo-device	vnodepager
pseudo-device	devpager


help help help...

I can't figure out what is going wrong...

Duncan


--
| Duncan Cameron  -  Ericsson Cellular Division, Guildford, UK |
|        <-  etldncn@deep-thought.ericsson.se   ->             |
|    The views and opinions expressed herein are personal      |
|    and are not necessarily those of Ericsson Telecomm Ltd.   |