Return to BSD News archive
Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!msuinfo!netnews.upenn.edu!news.amherst.edu!news.mtholyoke.edu!news.byu.edu!news.kei.com!MathWorks.Com!panix!zip.eecs.umich.edu!newsxfer.itd.umich.edu!newsrelay.iastate.edu!news.iastate.edu!ponderous.cc.iastate.edu!michaelv From: michaelv@iastate.edu (Michael L. VanLoon) Newsgroups: comp.os.386bsd.development Subject: Re: SCSI processor target mode implemented? Date: 15 Apr 94 20:31:41 GMT Organization: Iowa State University, Ames, Iowa Lines: 41 Message-ID: <michaelv.766441901@ponderous.cc.iastate.edu> References: <1994Apr13.133015.7424@unibw-hamburg.de> <CoB81n.4tD@world.std.com> NNTP-Posting-Host: ponderous.cc.iastate.edu In <CoB81n.4tD@world.std.com> hd@world.std.com (HD Associates) writes: >In article <1994Apr13.133015.7424@unibw-hamburg.de>, >Jens-Peter Akelbein <e_akel@unibw-hamburg.de> wrote: >>I've the Adaptec 1542cf SCSI-Adapter. Does it support the target >>mode? Is there anybody out there that has tried/implemented the >>code for this adapter are another one? >Adaptec DOES NOT SUPPORT TARGET MODE ON ANY OF ITS' HOST ADAPTERS. >This is a Adaptec's formal position. They do not test it and they >will not fix the firmware. >I do not know of any PC SCSI board with a supported processor target >mode. I've made quite a few calls without luck. If anyone locates >such a board let me know. My BusLogic bt742a/747s/etc. Technical Reference Manual has pages of details on Target Mode operation. I don't know what BusLogic's *official* stance on Target Mode is, but the Tech. Ref. Manual spends just as much time talking about Initiator Mode as Target Mode. In addition, my bt747s Installation Guide says in its Product Overview section (discussing mailbox design): ... This same mailbox protocol supports both initiator and target mode operation permitting high speed host-to-host communication and scatter-gather data transfers. I'd say, judging by the evidence, BusLogic has complete support for Target Mode operation. Other BusLogic boards use an almost identical firmware interface, leading me to believe all BusLogic products potentially support Target Mode. -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Michael L. VanLoon Iowa State University Computation Center michaelv@iastate.edu Project Vincent Systems Staff Free your mind and your machine -- NetBSD free Un*x for PC/Mac/Amiga/etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -