Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!news.Hawaii.Edu!ames!agate!howland.reston.ans.net!europa.eng.gtefsd.com!news.umbc.edu!haven.umd.edu!umd5.umd.edu!mark From: mark@elea.umd.edu (Mark Sienkiewicz) Newsgroups: comp.os.386bsd.questions Subject: Re: UUCP instructions? Date: 3 May 1994 18:01:35 GMT Organization: Zeno, IPST, University of Maryland Lines: 30 Message-ID: <2q63hv$k8i@hecate.umd.edu> References: <2prpnu$bhi@hermes.unt.edu> <Cp763y.EL0@mcs.anl.gov> NNTP-Posting-Host: elea.umd.edu In article <Cp763y.EL0@mcs.anl.gov>, John R. Winans <winans@xray.aps.anl.gov> wrote: >In article <2prpnu$bhi@hermes.unt.edu> wilsonm@dale.hsc.unt.EDU (Mike Wilson) writes: >>Just wondering if anyone has a step by step list of instructions for setting >>up UUCP on NetBSD 0.9. I am planning to install a modem into the machine and > >Hmmm... after a little pokeing around, I can see that I aint got it either >and I installed everything from the 0.9 release. I can only assume that I am running UUCP on 0.9-- it came with UUCP, but only as sources. Go poke around /usr/src. (/usr/src/libexce/uucp ?) What you will find there is Taylor UUCP, version 1.04 or so. As I recall, it builds pretty easy. >If you get it working, I am sure that the net would appreciate any comments you >have on the configuration and policy.h settings. I'll dig these up and send them along shortly. >I expect that sendmail will be a larger problem then UUCP. Go into the sendmail sources and make the config files. The UUCP-style addressing works just fine if you expect to say "a!b!c!d". My only uucp connection is UUNET, which is serves as my mail exchanger, so I modified the configuration file use UUCP for domain-style addresses. I'll post that too. Mark S.