Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!constellation!qns1.qns.com!news.sprintlink.net!hookup!swrinde!cs.utexas.edu!utnut!torn!uunet.ca!uunet.ca!fw.novatel.ca!sidney.novatel.ca!hpeyerl From: hpeyerl@sidney.novatel.ca (Herb Peyerl) Newsgroups: comp.os.386bsd.questions Subject: Re: 3C509 driver line... Date: 11 May 1994 14:43:00 GMT Organization: NovAtel Communications Ltd. Lines: 24 Message-ID: <2qqqtl$6s3@fw.novatel.ca> References: <CpL904.7zo@world.std.com> NNTP-Posting-Host: sidney.novatel.ca X-Newsreader: TIN [version 1.2 PL1] Brian J McGovern (mcgovern@world.std.com) wrote: : they did to their kernel config file. You don't say whether you're using NetBSD or FreeBSD. There IS a distinction in the case of the ep driver. In the case of NetBSD-current the following should work for you assuming you're only trying to get one 3c5x9 working: device ep0 at isa? port ? irq ? If you have more than one 3c5x9 then you will need to specify the port and irq explicitely. If you're running NetBSD you can also do a "man ep" to see what additional flags to use with ifconfig to make it go. Since I don't use FreeBSD I don't know how much of the above is applicable. -- hpeyerl@novatel.ca | NovAtel Commnications Ltd. hpeyerl@fsa.ca | <nothing I say matters anyway> "A sucking chest wound is nature's way of telling you to slow down."