Return to BSD News archive
Newsgroups: comp.unix.bsd Path: sserve!newshost.anu.edu.au!munnari.oz.au!bunyip.cc.uq.oz.au!harbinger.cc.monash.edu.au!msuinfo!uwm.edu!spool.mu.edu!howland.reston.ans.net!EU.net!sunic!trane.uninett.no!nac.no!nntp.nta.no!unik.no!davouds From: davouds@unik.no (Davoud Sadeghi Toussi) Subject: SCSI problem!? Message-ID: <1994May19.080316.25654@nntp.nta.no> Sender: news@nntp.nta.no Nntp-Posting-Host: janus.unik.no Organization: Universitetsstudiene paa Kjeller (UNIK), University of Oslo, Norway Date: Thu, 19 May 94 08:03:16 GMT Lines: 29 Hi, I am trying to install SunOS 4.1.1 on a Sun3/60 machine. The installation media is Tape Cartridge. I use "b st(0,0,0)" to boot from tape, but everytime this message cames up: "scsi:select failed". I tried to run "SCSI Bus External Loopback Test" and this test gives this resualt: SCSI Loopback Error: Signal: ACK, BSY, SEL, ATN, REQ, MSCM, C/D, I/O: exp F0, obs 0 SCSI Loopback Error: Signal: ACK, BSY, SEL, ATN, REQ, MSCM, C/D, I/O: exp F. obs 0 Test faild during pass 1. Total errors = 1 What am I doing wrong or what is the problem? Thanks for any help anyone! -- *----------------------------------------------------------------------* | Davoud Toussi | Phone: +47-63814570 | UNIK ,Postbox 70 | | davouds@unik.no | Fax: +47-63818146 | 2007 Kjeller, NORWAY | *----------------------------------------------------------------------*