*BSD News Article 31848


Return to BSD News archive

Xref: sserve comp.unix.sys5.r3:1978 comp.unix.pc-clone.32bit:6562 biz.sco.general:14672 comp.unix.sys5.r4:7564 comp.unix.unixware:6579 comp.os.linux.misc:17357 comp.os.386bsd.misc:2593 comp.periphs.scsi:21612 comp.sys.ibm.pc.hardware.storage:6711
Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!msuinfo!agate!howland.reston.ans.net!europa.eng.gtefsd.com!MathWorks.Com!yeshua.marcam.com!charnel.ecst.csuchico.edu!xmission!u.cc.utah.edu!cs.weber.edu!terry
From: terry@cs.weber.edu (Terry Lambert)
Newsgroups: comp.unix.sys5.r3,comp.unix.pc-clone.32bit,biz.sco.general,comp.unix.sys5.r4,comp.unix.unixware,comp.os.linux.misc,comp.os.386bsd.misc,comp.periphs.scsi,comp.sys.ibm.pc.hardware.storage
Subject: Re: Anyone using a BusLogic 747S with multiple disk drives ?
Date: 19 Jun 1994 09:27:53 GMT
Organization: Weber State University, Ogden, UT
Lines: 28
Message-ID: <2u132p$1t4@u.cc.utah.edu>
References: <CrDswJ.7qE@cti-software.nl> <2tl4b0$3e0@rand.org>
NNTP-Posting-Host: cs.weber.edu

In article <2tl4b0$3e0@rand.org> edhall@nntp.rand.org (Ed Hall) writes:
] : 	5) What kind of system/motherboard are you using
] 
]     Nice SuperEISA ver.1

It is (or should be) well known that NiCE EISA motherboards do not
support bus mastering DMAs in excess of 16M, just like ISA chip sets.

It may be that the EISA detection is not taking this into account,
probably because NiCE wasn't willing to put the string "FAKE EISA"
or some similar identifier at some memory location for marketing
reasons.  8-).

Drop down to 16M (potentially less, if the 384k hole below 1M is
being back-filled) and the problem should go away.

If you want to run more memory, ask for a hack to force the use
of bounce-buffers on EISA (not likely to happen in your lifetime)
or buy only motherboards with known working chipsets (I'm partial
to SiS for EISA, but that's just me -- and my very, very fast
machine... Sis has the fastest Gate A20 I've ever seen, too).


					Terry Lambert
					terry@cs.weber.edu
---
Any opinions in this posting are my own and not those of my present
or previous employers.