Return to BSD News archive
Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!msuinfo!agate!howland.reston.ans.net!swrinde!news.dell.com!tadpole.com!uunet!tinman2!tdphette
From: tdphette@mke.ab.com (Thad Phetteplace x4461)
Newsgroups: comp.os.386bsd.questions
Subject: Re: USR Sporter Modem Dialin problem!!
Date: 21 Jun 1994 19:35:28 GMT
Organization: Allen-Bradley Co.
Lines: 27
Message-ID: <2u7fe1INN752@scarecrow.mke.ab.com>
References: <2u6pfg$drc@pendragon.jsc.nasa.gov>
NNTP-Posting-Host: tinman.mke.ab.com
X-Newsreader: TIN [version 1.2 PL2]
Thuy Mai (thuy@ftp.jsc.nasa.gov) wrote:
>
> If any one using external USR Sporter 14.4 for dialing in,
> please let me your dip swicth setting on the modem.
I use USR Sporsters on my FreeBSD BBS system. The only change I made to
the factory defaults was to put dip switch 5 up (auto answer mode). The
dip switches look like the following:
UUDUUUUD
12345678
I also made the necessary changes to the /etc/ttys to run a getty on each
of the serial lines. Blast me some email if you want more info about
that.
Hope this helps,
--
Thad Phetteplace
Network Systems Analyst, Allen-Bradley Co.
Phone: (414)382-4461
Email: tdphette@mke.ab.com
The opinions expressed here are entirely my own and not that of my employer.
I am not a slob, I am simply doing an experiment in domestic entropy!