Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!msuinfo!agate!howland.reston.ans.net!gatech!newsxfer.itd.umich.edu!zip.eecs.umich.edu!yeshua.marcam.com!news.kei.com!ub!penny!mary!mazumdar From: mazumdar@mary.cs.fredonia.edu (Jin Mazumdar) Subject: Re: FreeBSD 1.1.5R and Buslogic VLB SCSI controller? Message-ID: <1994Jul8.110629.11056@penny.cs.fredonia.edu> Sender: news@penny.cs.fredonia.edu (News Administrator) Organization: Math / CS, State Univ. of N. Y. College at Fredonia X-Newsreader: TIN [version 1.2 PL1] References: <2vi0l5$26h@scoob.xap.com> Date: Fri, 8 Jul 1994 11:06:29 GMT Lines: 31 Bing the merciless (bing@xap.com) wrote: : I recently bought a new machine with the intention of running FreeBSD : 1.1.5R at my home. This is my first experience with SCSI and *BSD. : kcopy_bt boots, I stick in the filesyst floppy, it finds my SCSI : controller and my 1.2Gb Conner cfp1060s SCSI disk, it says 'changing : root device to fd0d' and hangs. The floppy drive light never goes : back on. : Nathan Bradshaw : -- bing@xap.com Yes, I have exactly the same problem. If I change the interrupt to 11 or 14 then I can go further into the installation. However, I get a "strayinterrupt c" message while creating the filesystems, a lot of error messages and I have to abort. -- Jin Mazumdar (internet:) mazumdar@cs.fredonia.edu >>> Dept. Of Math and C. S. <<< >>> State University of New York College at Fredonia <<< >>> Fredonia, N.Y. 14063 (716) 673 3459 <<<