Return to BSD News archive
Newsgroups: comp.os.386bsd.questions Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!msuinfo!uwm.edu!spool.mu.edu!howland.reston.ans.net!ix.netcom.com!netcom.com!netcom18!ceb From: ceb@netcom18.netcom.com (Ch. Buckley) Subject: Re: FreeBSD 1.1.5.1 Install Help In-Reply-To: noses@oink.rhein.de's message of 2 Nov 1994 13:28:07 +0100 Message-ID: <CEB.94Nov12023104@netcom18.netcom.com> Sender: ceb@netcom.com (Ch. Buckley) Organization: Mauto, Palo Alto References: <3934eo$j0t@usenet.INS.CWRU.Edu> <JKH.94Oct31100551@freefall.cdrom.com> <3980kn$jsa@oink.rhein.de> Date: Sat, 12 Nov 1994 10:31:03 GMT Lines: 22 In article <3980kn$jsa@oink.rhein.de> noses@oink.rhein.de (Noses) writes: in <JKH.94Oct31100551@freefall.cdrom.com> Jordan K. Hubbard (jkh@freefall.cdrom.com) wrote: > In article <3934eo$j0t@usenet.INS.CWRU.Edu> dh950@cleveland.Freenet.Edu (Kair-Chuan Lim) writes: > [ Summary: Took hammer [FreeBSD], nail [PC], whacked thumb somewhere > along the line, now yelling ] Hey - me too 8-))). Took hammer and nail and killed my second wd8013ep. Same thing happened: The card was hardware configured to IRQ 10, IO 300 and got reprogrammed to IRQ 6, IO 220. I reset it and it's working again (if someone else is asking: Remove the card from the network, set the jumper to IRQ 3, turn the computer on, turn it off, set the jumper to IRQ 10). It's the distribution kernel of 1.1.5.1... Try improving the probe of the ie driver (take a look at Mycroft's patches) and you'll have fewer unhappy people. This happens to me, too, every time I upgrade, and the config software for the card runs only under DOS. Where are these patches, please? --