Return to BSD News archive
Path: sserve!manuel!munnari.oz.au!labtam!eyrie!athos From: athos@eyrie.img.com.au (David Burren) Newsgroups: comp.unix.bsd Subject: Re: WD Ethernet Card not found on warmboot Message-ID: <714317431.111@eyrie.img.com.au> Date: 20 Aug 92 13:30:32 GMT References: <1992Aug19.165319.14767@doug.cae.wisc.edu> Organization: img Consultants, Melbourne, Australia Lines: 22 In <1992Aug19.165319.14767@doug.cae.wisc.edu> dinda@cae.wisc.edu (Dinda Peter) writes: >I have 386BSD 0.1 installed on a Gateway 486/33, 170MB partion, >16MB RAM, Diamond Speedstar card, Western Digital Ethercard PLUS >Elite16 Combo (8003E compatible). After some staring at a BSD >admin handbook, ifconfig, routeing (no demon), named, and sendmail >are up and running. I can telnet, ftp, etc without any problems. >However, this is only that case when the machine is power-cycled. On >warmboot initiated via reboot or shutdown -r (or a panic) the WD >Ethernet card is not recognized. The card is correctly configured >as IRQ2, I/O adx 0x280, Mem base 0xD000 with EASYSET.EXE. Any thoughts? I also have an Elite16 Combo (it's the 8013E with AUI, BNC, & UTP) and see exactly the same symptoms. No ideas yet, just another "me too!"... This is in a system that's evolved from a 16 MHz 386SX through a 20 MHz 386DX to a 40 MHz 386DX. Using a mono display, A1540, floppy, & serial. The we device has never so far been detected on warm-boot. ___________________________________________________________________________ David Burren athos@img.com.au img Consultants +61 3 634 3635