Return to BSD News archive
Path: sserve!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.mira.net.au!otis.apana.org.au!serval.net.wsu.edu!news.clark.edu!spool.mu.edu!howland.reston.ans.net!pipex!sunic!trane.uninett.no!due.uninett.no!titan.cmr.no!tl From: tl@titan.cmr.no (Tom Lislegaard) Newsgroups: comp.os.386bsd.questions Subject: [Q] speed setting for dialin lines ? Date: 20 Dec 1994 10:32:53 GMT Organization: Christian Michelsen Research a/s Lines: 17 Distribution: world Message-ID: <3d6bsl$fh2@due.uninett.no> NNTP-Posting-Host: titan.cmr.no I want to set up a dialin line with a DTE speed of 115200, but I have a problem with forcing the modem to the correct speed. The modem in question can't be set expicitly for a given rate, it will have to autodetect the speed through an AT command. I figured this would be feasible by putting a few AT's in the initial message capability (im) in gettytab, but no such luck; the modem is always stuck on the last speed that I tip'ed it. (The problem is not the 115200 per se, but rather any change of speed from the last dialout connection). Tips/solutions anyone ? -tom -- Tom Lislegaard, System Manager, Chr. Michelsen Research a/s, Bergen, Norway