Return to BSD News archive
Path: sserve!newshost.anu.edu.au!munnari.oz.au!constellation!convex!insosf1.infonet.net!news-feed-1.peachnet.edu!gatech!howland.reston.ans.net!news.sprintlink.net!mv!datasync!mgehres Newsgroups: comp.os.386bsd.questions Message-ID: <1189@datasync.mv.com> Reply-To: mgehres@datasync.mv.com (DataSync) Date: Tue, 27 Dec 1994 21:09:05 Subject: Mitsumi CD-ROM install trouble. From: mgehres@datasync.mv.com (DataSync) Lines: 13 I am attempting to install FreeBDS 2.0 using a Mitsumi CD-ROM. During boot up it detects the CD as mcd0 but on irq 10 instead of 5 as the card is configured. It doesn't matter what the jumper on the card is set at, always irq 10. Then during load from CD the CD busy light will flash then a pause then I get time out reading device errors. Is this due the the irq error and does anyone know how to solve it? Thanks, mgehres@datasync.mv.com ÉÍVirtualNET @1601003ÍÍÍÍËÍÍÍÍÍÍDataSyncÍÍÍÍÍÍËÍÍÍ601-872-2369 @ 28.8kÍ» ÍÎÍGulf-SyncNET @1ÍÍÍÍÍÍÍÍÊÍÍËÍJesus Saves !ÍÍÍÊÍËÍ601-875-2355 @ 14.4kÍÎÍ ÈÍinternet @datasync.mv.comÍÊÍOcean Springs, MSÍÊÍVBBS 6.14-DM/F![VSB]ͼ