Return to BSD News archive
Newsgroups: comp.os.386bsd.misc Path: sserve!newshost.anu.edu.au!munnari.oz.au!spool.mu.edu!howland.reston.ans.net!news.sprintlink.net!EU.net!goya!sanson!diatel.upm.es!jmrueda From: jmrueda@diatel.upm.es (Javier Martin Rueda ) Subject: VESA and PCI peripherals for FreeBSD 2.0 Message-ID: <D3MzJF.JLt@dit.upm.es> Sender: usenet@dit.upm.es (System Management uucp news) Nntp-Posting-Host: gaudi.diatel.upm.es Organization: Departamento de Ingenieria y Arquitecturas Telematicas, EUITT, UPM Date: Tue, 7 Feb 1995 15:40:27 GMT Lines: 34 Hi. I'm about to purchase a 486DX2-66 PC to install FreeBSD 2.0 in it and use it as a server for NFS, printers, etc. Among its requirements, I have to use a fast SCSI-II controller, and a fast Ethernet network adapter. I want to use either PCI or VESA cards for those two, as I think that will be the fastest. Am I right? Would EISA be faster? Regarding VLB SCSI controllers, I've used and tested the Adaptec 2842 with a Conner CFP-1060S drive, and IOZone reports about 1.5-2 Mb/sec for writing and 2.5-3.3 Mb/sec for reading (I've excluded figures that are too high for reading speed because of the Unix cache). Regarding PCI SCSI controllers, I haven't tested any. I'd appreciate that someone e-mail me the speed report generated by iozone with different SCSI controllers, specially the PCI controllers supported by FreeBSD (Buslogic 946c and NCR 53810). Is the Adaptec 2940 supported already, or support isn't ready yet? By the way, what does the 2940 have, so that it is about 4-5 times more expensive than the NCR, for example? With respect to Ethernet adapters, I have no experience with VESA or PCI ones. The release notes list a lot of network adapters supported by FreeBSD, but they don't say if they are ISA, EISA, PCI or VESA. Does that matter? For instance, I've seen VESA network adapters that are compatible with NE-2000. Does that mean that they can be used with FreeBSD just as if they were 16-bit ISA cards, but much faster? Again, I would appreciate reports of people who are using PCI or VESA network cards with FreeBSD, specifying the brand and model, and benchmark results, if available. Thanks in advance. If I get any reports (I hope so :-) ), I will post a summary here, just in case there are other people in the same situation.