Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.kei.com!news.mathworks.com!tank.news.pipex.net!pipex!howland.reston.ans.net!EU.net!Austria.EU.net!news.aut.alcatel.at!atusc75!ladavac From: ladavac@aut.alcatel.at (Marino Ladavac) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Bootup messages with PCI Date: 30 Aug 1995 17:35:46 GMT Organization: Alcatel Austria AG Lines: 18 Message-ID: <4227hi$sd@atusks02.aut.alcatel.at> References: <420bd4$1ll@jraynard.demon.co.uk> NNTP-Posting-Host: atusc75.aut.alcatel.at X-Newsreader: TIN [version 1.2 PL2] James Raynard (james@jraynard.demon.co.uk) wrote: : When booting with my shiny new Triton motherboard, I get the following : messages:- : Probing for devicecs on the pci0 bus: : configuration mode 1 allows 32 devices. : pci0:0: INTEL CORPORATION, device=0x122d, class=bridge [not supported] : pci0:7: INTEL CORPORATION, device=0x122e, class=bridge [not supported] Slightly misleading comment, which should be changed into something on the line of "Support not needed." It says, basically, that FreeBSD leaves bridges as configured by BIOS, iirc. : "If English was good enough for Jesus Christ, it's good enough for me." : [Southern US Congressman] Didn't He speak Hebrew/Latin? BTW, which congressman?