Return to BSD News archive
Newsgroups: comp.unix.bsd Path: sserve!manuel!munnari.oz.au!spool.mu.edu!caen!hellgate.utah.edu!fcom.cc.utah.edu!cs.weber.edu!terry From: terry@cs.weber.edu (A Wizard of Earth C) Subject: Re: Minimum system requirements for 386bsd ? Message-ID: <1992Sep15.193402.4399@fcom.cc.utah.edu> Sender: news@fcom.cc.utah.edu Organization: Weber State University (Ogden, UT) References: <2551.2ab5de20@vger.nsu.edu> <2552.2ab5def0@vger.nsu.edu> Date: Tue, 15 Sep 92 19:34:02 GMT Lines: 32 In article <2552.2ab5def0@vger.nsu.edu> r_moore@vger.nsu.edu writes: >In article <2551.2ab5de20@vger.nsu.edu>, r_moore@vger.nsu.edu writes: >> I need to know what the minimum requirements are to run 386bsd are. More >> specifically will it run on this configuration: >> 386sx @16mhz >> 1 meg RAM >> 40 meg HD >> if it will not run on this system what additions will I need to make ? >> Thanks, Richard >> > While I'm at it is there a bsd FAQ for information such as my above question ? >if so is there a site where I can FTP it from ? > Thanks again, Richard > It *will* run on that configuration; however, you will need a high density floppy drive to load it before it can run, and you will need to rawrite the files from a DOS machine with a high density drive to get them onto disks. Terry Lambert terry_lambert@gateway.novell.com terry@icarus.weber.edu --- Any opinions in this posting are my own and not those of my present or previous employers. -- ------------------------------------------------------------------------------- "I have an 8 user poetic license" - me Get the 386bsd FAQ from agate.berkeley.edu:/pub/386BSD/386bsd-0.1/unofficial -------------------------------------------------------------------------------