Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.kei.com!news.mathworks.com!newsfeed.internetmci.com!howland.reston.ans.net!ee.und.ac.za!nntp.und.ac.za!beastie.cs.und.ac.za!harverso From: harverso@beastie.cs.und.ac.za (Tony Harverson ) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: ed0 (wd8013EP) timeout with 2.0.5 during ftp install Date: 19 Sep 1995 20:53:58 GMT Organization: University of Natal (Durban), South Africa Lines: 25 Message-ID: <43nal6$iu1@owl.und.ac.za> References: <JOED.95Sep17210631@hollie> <43itle$nt4@news.bu.edu> NNTP-Posting-Host: beastie.cs.und.ac.za X-Newsreader: TIN [version 1.2 PL2] Mikhail Teterin (mi@cs.bu.edu) wrote: : Some time ago (Sun, 17 Sep 1995 20:06:31 GMT) honorable Joe Drumgoole (ERL Hacker), : residing at joed@hollie wrote: : |I'm currently trying to install FreeBSD 2.0.5 on a machine which was : |previously running 1.1.5.1 quite happily. However ed0 (a WD8013EP) keeps : |timing out when it it is touched by any sort of network command. It is : |hardwired (via the board jumpers) to port 0x280 and irq 3. I therefore us : |boot -c to configure these options prior to boot however it still timeout : |although the kernel detects the card at boot time. Whilst the problem might be one of the hardware problems mentioned, I was getting this error on a router of mine on a coax Network (yes, Coax - you remember, With the T-Pieces ? ;) When the coax segment wasn't closed (someone stepped on one of the T-pieces and jarred it loosed.. You might wanna check the integrity of the cables.. Tony -- ~~~|~~~ aka: Tony Harverson - the #za Stalker | rog = harverso@beastie.cs.und.ac.za "...Let us die young or let us live forever/We Don't have the power but we never say never.." - Alphaville