Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.sprintlink.net!howland.reston.ans.net!agate!reason.cdrom.com!usenet From: "Jordan K. Hubbard" <jkh@FreeBSD.org> Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: FreeBSD as a Cisco 7000? Date: 17 Sep 1995 04:12:17 GMT Organization: Walnut Creek CDROM Lines: 12 Message-ID: <43g771$2tl@reason.cdrom.com> References: <43dicb$c40@sundog.tiac.net> NNTP-Posting-Host: time.cdrom.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 1.1N (X11; I; FreeBSD 2.1-STABLE i386) To: dana@millenium.tiac.net X-URL: news:43dicb$c40@sundog.tiac.net dana@millenium.tiac.net (Dana Basken) wrote: >I've been looking for information on making a FreeBSD box into a T1 router, >I would assume with multiple V.35 cards and an advanced routing daemon. Has >anyone tried this? Success stories, horror stories, I'd like to here them! See http://www.etinc.com - they make a T1 card that works just fine with FreeBSD and, in fact, also sell a commercial routing box to do just what you describe based around a generic 486DX2, their card and FreeBSD. I believe you can buy a single card that will run up to 4 ports at T1 speeds. -- Jordan