Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!goanna.cs.rmit.EDU.AU!munnari.oz.au!spool.mu.edu!howland.reston.ans.net!swrinde!gatech!news.mathworks.com!newsxfer.itd.umich.edu!agate!tfs.com!mailhub.tfs.com!julian
From: julian@mailhub.tfs.com (Julian Elischer)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: Re: Adding SCSI disk and Adaptec 1542C controller
Date: 30 Sep 1995 05:35:44 GMT
Organization: TRW Financial Systems, Oakland, CA
Lines: 36
Message-ID: <44ikvg$fua@times.tfs.com>
References: <rrwood-2809951156540001@bpci.net3.io.org>
NNTP-Posting-Host: mailhub.tfs.com
In article <rrwood-2809951156540001@bpci.net3.io.org>,
Roy Wood <rrwood@io.org> wrote:
>aha0: 1542C/CF detected, unlocking mailbox
>aha0: reading board settings, dma=5 int=11 (bus speed defaulted)
>aha0 at 0x330-0x333 irq 11 drq 5 on isa
>aha0 waiting for scsi devices to settle
>aha0 targ 0 lun 0: type 0(direct) fixed SCSI2
>aha0 targ 0 lun 0: <QUANTUM LPS270S 590W>
>sd0: 258MB (528808 total sec), 2740 cyl, 2 head, 96 sec, bytes/sec 512
This proves it's working fine and is configured..
>I also made sure to set up the appropriate entries in /dev as follows:
>brw-r----- 1 root operator 4, 0 Sep 28 11:43 sd0a
[..]
>brw-r----- 1 root operator 4, 7 Sep 28 11:43 sd0h
and the /dev/rsd devices as well I assume?
>sd0 hasn't been configured!
what EXACTLY does it say?
is this a 2.0.5 or 2.0 or 1.1.5 system?
you have /dev/rsd0c?
+----------------------------------+ ______ _ __
| __--_|\ Julian Elischer | \ U \/ / On assignment
| / \ julian@tfs.com +------>x USA \ in a very strange
| ( OZ ) 300 lakeside Dr. oakland CA. \___ ___ | country !
+- X_.---._/ USA+(510) 645-3137(wk) \_/ \\
v