Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.uwa.edu.au!classic.iinet.com.au!swing.iinet.net.au!news.uoregon.edu!cuhknntp!hpg30a.csc.cuhk.hk!night.primate.wisc.edu!sdd.hp.com!swrinde!howland.reston.ans.net!newsfeed.internetmci.com!news.sprintlink.net!EU.net!Austria.EU.net!newsfeed.ACO.net!aci.cvut.cz!rhino.cis.vutbr.cz!newshelp From: <jkucera@elanor.sci.muni.cz> Newsgroups: comp.bugs.2bsd Subject: SCSI, PCI, NCR-chip troubles Date: Mon, 23 Oct 95 13:10:53 +0200 Organization: Technical University of Brno, Czech Republic Lines: 36 Message-ID: <59867.jkucera@elanor.sci.muni.cz> Reply-To: <jkucera@sci.muni.cz> NNTP-Posting-Host: tfkuc.sci.muni.cz X-Minuet-Version: Minuet1.0_Beta_16 X-POPMail-Charset: English Hello friends, we tried to instal BSD Unix to computer with the following configuration: (I am not too familiar with hardware, so I introduce only a few basic information.) Pentium 75 MHz Mainboard PAM-00541 (DTK) with Triton chips Award Bios SCSI Hard Disk CFS 2105S 2.1 GB, 5400 RPM (Conner) PCI SCSI Card NCR 53C810 (?DTK) SCSI CD ROM ? Unfortunately the booting stopped without any error message after writing a few dots to screen. If we press SHIFT during the booting, then everything is recognized correctly (eg. CD-ROM) except the hard disk. The system is not able to recognize hard disk at all. ? (If I use DOS, hardware seems to work well.) Could anybody advice me what to try or what to do or could anybody who has appropriate experience discuss this trouble with me? Thank you in advance Jarek ********************************************************************** * Jaromir Kucera * * Dept. of Theoretical Physics and Astrophysics * * Kotlarska 2 * * 611 37 BRNO * * Czech Republic * * tel. +42+5+41129 456 * * fax. +42+5+41211214 * **********************************************************************