Return to BSD News archive
#! rnews 1556 bsd Newsgroups: comp.unix.bsd.bsdi.misc Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!zombie.ncsc.mil!news.mathworks.com!newsfeed.internetmci.com!EU.net!chsun!hslrswi!jml From: jml@hslrswi.hasler.ascom.ch (Jean-Marc Luethi CISE 3528) Subject: Troubles with Quantum XP32150 HD X-Nntp-Posting-Host: eugen.hasler.ascom.ch Message-ID: <1995Oct25.155123.1822@hasler.ascom.ch> Sender: news@hasler.ascom.ch Organization: Ascom Hasler AG, Berne, Switzerland X-Newsreader: TIN [version 1.2 PL2] Date: Wed, 25 Oct 1995 15:51:23 GMT Lines: 42 I just bought such a HD and try to install BSDi 2.0 on it with scsi id 2. Installtation works perfect. Rebuilding the kernel with config bsd root on sd2a and swap on sd2b in the config file to. Then when I boot with floppy: Boot: sd(2,0)/bsd I get : can't read disk label sd0: command failed, status 0 can't open sd(2,0)/bsd: can't read label. I already did it with an other disk with scsi id 1 and had no problem. I wondered to get the line with: sd0: command .... why sd0 If somebody out there has an idea, helps will be greatly appreciated Configuration: 486/33 16MB RAM 1 ISA HD (C) with bsd 1.0 Disk wd0 1 ISA HD (D) with linux Disk hdb 1 SCSI HD Quantum 240 MB with linux Disk sd0 id 0 1 SCSI HD Conner 2GB with linux Disk sd1 id 1 1 SCSI HD Quantum xp32150 with BSD2.0 Disk sd2 id 2 1 SCSI CDROM Toshiba 3401 sd3 id 5 1 SCSI Tape 250 MB id 6 Adaptec 1542B SCSI Adapter Best regards jean-marc luethi jml@hasler.ascom.ch