Return to BSD News archive
Newsgroups: comp.unix.bsd
Path: sserve!manuel!munnari.oz.au!spool.mu.edu!agate!tfs.com!tfs.com!julian
From: julian@tfs.com (Julian Elischer)
Subject: new new scsi release beta2 part 3 of 5
Message-ID: <1992Sep23.222116.16926@tfs.com>
Organization: TRW Financial Systems
Date: Wed, 23 Sep 1992 22:21:16 GMT
Lines: 1741
# This is a shell archive. Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file". Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
# scsi/scsi_disk.h
# scsi/sd.c
#
echo x - scsi/scsi_disk.h
sed 's/^X//' >scsi/scsi_disk.h << 'END-of-scsi/scsi_disk.h'
X/*
X * HISTORY
X * $Log: scsi.h,v $
X *
X */
X
X/*
X * SCSI interface description
X */
X
X/*
X * Some lines of this file comes from a file of the name "scsi.h"
X * distributed by OSF as part of mach2.5,
X * so the following disclaimer has been kept.
X *
X * Copyright 1990 by Open Software Foundation,
X * Grenoble, FRANCE
X *
X * All Rights Reserved
X *
X * Permission to use, copy, modify, and distribute this software and
X * its documentation for any purpose and without fee is hereby granted,
X * provided that the above copyright notice appears in all copies and
X * that both the copyright notice and this permission notice appear in
X * supporting documentation, and that the name of OSF or Open Software
X * Foundation not be used in advertising or publicity pertaining to
X * distribution of the software without specific, written prior
X * permission.
X *
X * OSF DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
X * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
X * IN NO EVENT SHALL OSF BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
X * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
X * LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
X * NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
X * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
X */
X
X/*
X * Largely written by Julian Elischer (julian@tfs.com)
X * for TRW Financial Systems.
X *
X * TRW Financial Systems, in accordance with their agreement with Carnegie
X * Mellon University, makes this software available to CMU to distribute
X * or use in any manner that they see fit as long as this message is kept with
X * the software. For this reason TFS also grants any other persons or
X * organisations permission to use or modify this software.
X *
X * TFS supplies this software to be publicly redistributed
X * on the understanding that TFS is not responsible for the correct
X * functioning of this software in any circumstances.
X *
X */
X
X/*
X * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
X */
X
X/*
X * SCSI command format
X */
X
X
Xstruct scsi_reassign_blocks
X{
X u_char op_code;
X u_char :5;
X u_char lun:3;
X u_char unused[3];
X u_char link:1;
X u_char flag:1;
X u_char :6;
X};
X
Xstruct scsi_rw
X{
X u_char op_code;
X u_char addr_2:5; /* Most significant */
X u_char lun:3;
X u_char addr_1;
X u_char addr_0; /* least significant */
X u_char length;
X u_char link:1;
X u_char flag:1;
X u_char :6;
X};
X
Xstruct scsi_rw_big
X{
X u_char op_code;
X u_char rel_addr:1;
X u_char :4; /* Most significant */
X u_char lun:3;
X u_char addr_3;
X u_char addr_2;
X u_char addr_1;
X u_char addr_0; /* least significant */
X u_char reserved;;
X u_char length2;
X u_char length1;
X u_char link:1;
X u_char flag:1;
X u_char :4;
X u_char vendor:2;
X};
X
Xstruct scsi_read_capacity
X{
X u_char op_code;
X u_char :5;
X u_char lun:3;
X u_char addr_3; /* Most Significant */
X u_char addr_2;
X u_char addr_1;
X u_char addr_0; /* Least Significant */
X u_char unused[3];
X u_char link:1;
X u_char flag:1;
X u_char :6;
X};
X
Xstruct scsi_start_stop
X{
X u_char op_code;
X u_char :5;
X u_char lun:3;
X u_char unused[2];
X u_char start:1;
X u_char :7;
X u_char link:1;
X u_char flag:1;
X u_char :6;
X};
X
X
X
X/*
X * Opcodes
X */
X
X#define REASSIGN_BLOCKS 0x07
X#define READ_COMMAND 0x08
X#define WRITE_COMMAND 0x0a
X#define MODE_SELECT 0x15
X#define MODE_SENSE 0x1a
X#define START_STOP 0x1b
X#define PREVENT_ALLOW 0x1e
X#define READ_CAPACITY 0x25
X#define READ_BIG 0x28
X#define WRITE_BIG 0x2a
X
X
X
Xstruct scsi_read_cap_data
X{
X u_char addr_3; /* Most significant */
X u_char addr_2;
X u_char addr_1;
X u_char addr_0; /* Least significant */
X u_char length_3; /* Most significant */
X u_char length_2;
X u_char length_1;
X u_char length_0; /* Least significant */
X};
X
Xstruct scsi_reassign_blocks_data
X{
X u_char reserved[2];
X u_char length_msb;
X u_char length_lsb;
X struct
X {
X u_char dlbaddr_3; /* defect logical block address (MSB) */
X u_char dlbaddr_2;
X u_char dlbaddr_1;
X u_char dlbaddr_0; /* defect logical block address (LSB) */
X } defect_descriptor[1];
X};
X
Xunion disk_pages /* this is the structure copied from osf */
X{
X struct page_disk_format {
X u_char pg_code:6; /* page code (should be 3) */
X u_char :2;
X u_char pg_length; /* page length (should be 0x16) */
X u_char trk_z_1; /* tracks per zone (MSB) */
X u_char trk_z_0; /* tracks per zone (LSB) */
X u_char alt_sec_1; /* alternate sectors per zone (MSB) */
X u_char alt_sec_0; /* alternate sectors per zone (LSB) */
X u_char alt_trk_z_1; /* alternate tracks per zone (MSB) */
X u_char alt_trk_z_0; /* alternate tracks per zone (LSB) */
X u_char alt_trk_v_1; /* alternate tracks per volume (MSB) */
X u_char alt_trk_v_0; /* alternate tracks per volume (LSB) */
X u_char ph_sec_t_1; /* physical sectors per track (MSB) */
X u_char ph_sec_t_0; /* physical sectors per track (LSB) */
X u_char bytes_s_1; /* bytes per sector (MSB) */
X u_char bytes_s_0; /* bytes per sector (LSB) */
X u_char interleave_1;/* interleave (MSB) */
X u_char interleave_0;/* interleave (LSB) */
X u_char trk_skew_1; /* track skew factor (MSB) */
X u_char trk_skew_0; /* track skew factor (LSB) */
X u_char cyl_skew_1; /* cylinder skew (MSB) */
X u_char cyl_skew_0; /* cylinder skew (LSB) */
X u_char reserved1:4;
X u_char surf:1;
X u_char rmb:1;
X u_char hsec:1;
X u_char ssec:1;
X u_char reserved2;
X u_char reserved3;
X } disk_format;
X struct page_rigid_geometry {
X u_char pg_code:7; /* page code (should be 4) */
X u_char mbone:1; /* must be one */
X u_char pg_length; /* page length (should be 0x16) */
X u_char ncyl_2; /* number of cylinders (MSB) */
X u_char ncyl_1; /* number of cylinders */
X u_char ncyl_0; /* number of cylinders (LSB) */
X u_char nheads; /* number of heads */
X u_char st_cyl_wp_2; /* starting cyl., write precomp (MSB) */
X u_char st_cyl_wp_1; /* starting cyl., write precomp */
X u_char st_cyl_wp_0; /* starting cyl., write precomp (LSB) */
X u_char st_cyl_rwc_2;/* starting cyl., red. write cur (MSB)*/
X u_char st_cyl_rwc_1;/* starting cyl., red. write cur */
X u_char st_cyl_rwc_0;/* starting cyl., red. write cur (LSB)*/
X u_char driv_step_1; /* drive step rate (MSB) */
X u_char driv_step_0; /* drive step rate (LSB) */
X u_char land_zone_2; /* landing zone cylinder (MSB) */
X u_char land_zone_1; /* landing zone cylinder */
X u_char land_zone_0; /* landing zone cylinder (LSB) */
X u_char reserved1;
X u_char reserved2;
X u_char reserved3;
X } rigid_geometry;
X} ;
END-of-scsi/scsi_disk.h
echo x - scsi/sd.c
sed 's/^X//' >scsi/sd.c << 'END-of-scsi/sd.c'
X/*
X * Written by Julian Elischer (julian@tfs.com)
X * for TRW Financial Systems for use under the MACH(2.5) operating system.
X *
X * TRW Financial Systems, in accordance with their agreement with Carnegie
X * Mellon University, makes this software available to CMU to distribute
X * or use in any manner that they see fit as long as this message is kept with
X * the software. For this reason TFS also grants any other persons or
X * organisations permission to use or modify this software.
X *
X * TFS supplies this software to be publicly redistributed
X * on the understanding that TFS is not responsible for the correct
X * functioning of this software in any circumstances.
X *
X */
X
X/*
X * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
X */
X
X/* RCS header and log section
X * $Log: $
X */
X#define SPLSD splbio
X#define ESUCCESS 0
X#include <sd.h>
X#include <sys/types.h>
X#include "param.h"
X#include "dkbad.h"
X#include "systm.h"
X#include "conf.h"
X#include "file.h"
X#include "stat.h"
X#include "ioctl.h"
X#include "buf.h"
X#include "uio.h"
X#include "malloc.h"
X
X#include <sys/errno.h>
X#include <sys/disklabel.h>
X#include <scsi/scsi_all.h>
X#include <scsi/scsi_disk.h>
X#include <scsi/scsiconf.h>
X
Xlong int sdstrats,sdqueues;
X
X
X#include <ddb.h>
X#if NDDB > 0
Xint Debugger();
X#else NDDB > 0
X#define Debugger()
X#endif NDDB > 0
X
X
X#define PAGESIZ 4096
X#define SECSIZE 512
X#define PDLOCATION 29
X#define BOOTRECORDSIGNATURE (0x55aa & 0x00ff)
X#define SDOUTSTANDING 2
X#define SDQSIZE 4
X#define SD_RETRIES 4
X
X#define MAKESDDEV(maj, unit, part) (makedev(maj,((unit<<3)+part)))
X#define UNITSHIFT 3
X#define PARTITION(z) (minor(z) & 0x07)
X#define RAW_PART 3
X#define UNIT(z) ( (minor(z) >> UNITSHIFT) )
X
X#define WHOLE_DISK(unit) ( (unit << UNITSHIFT) + RAW_PART )
X
Xstruct buf sd_buf_queue[NSD];
Xint sd_done();
Xint sdstrategy();
X
Xint sd_debug = 0;
X
Xstruct scsi_xfer sd_scsi_xfer[NSD][SDOUTSTANDING]; /* XXX */
Xstruct scsi_xfer *sd_free_xfer[NSD];
Xint sd_xfer_block_wait[NSD];
X
Xstruct sd_data
X{
X int flags;
X#define SDVALID 0x02 /* PARAMS LOADED */
X#define SDINIT 0x04 /* device has been init'd */
X#define SDWAIT 0x08 /* device has someone waiting */
X#define SDHAVELABEL 0x10 /* have read the label */
X#define SDDOSPART 0x20 /* Have read the DOS partition table */
X#define SDWRITEPROT 0x40 /* Device in readonly mode (S/W)*/
X struct scsi_switch *sc_sw; /* address of scsi low level switch */
X int ctlr; /* so they know which one we want */
X int targ; /* our scsi target ID */
X int lu; /* out scsi lu */
X int cmdscount; /* cmds allowed outstanding by board*/
X int wlabel; /* label is writable */
X struct disk_parms
X {
X u_char heads; /* Number of heads */
X u_short cyls; /* Number of cylinders */
X u_char sectors;/*dubious*/ /* Number of sectors/track */
X u_short secsiz; /* Number of bytes/sector */
X u_long disksize; /* total number sectors */
X }params;
X struct disklabel disklabel;
X struct dos_partition dosparts[NDOSPART]; /* DOS view of disk */
X int partflags[MAXPARTITIONS]; /* per partition flags */
X#define SDOPEN 0x01
X int openparts; /* one bit for each open partition */
X unsigned int sd_start_of_unix; /* unix vs dos partitions */
X}sd_data[NSD];
X
X
Xstatic int next_sd_unit = 0;
X/***********************************************************************\
X* The routine called by the low level scsi routine when it discovers *
X* A device suitable for this driver *
X\***********************************************************************/
X
Xint sdattach(ctlr,targ,lu,scsi_switch)
Xstruct scsi_switch *scsi_switch;
X{
X int unit,i;
X unsigned char *tbl;
X struct sd_data *sd;
X struct disk_parms *dp;
X
X unit = next_sd_unit++;
X sd = sd_data + unit;
X dp = &(sd->params);
X if(scsi_debug & PRINTROUTINES) printf("sdattach: ");
X /*******************************************************\
X * Check we have the resources for another drive *
X \*******************************************************/
X if( unit >= NSD)
X {
X printf("Too many scsi disks..(%d > %d) reconfigure kernel",(unit + 1),NSD);
X return(0);
X }
X /*******************************************************\
X * Store information needed to contact our base driver *
X \*******************************************************/
X sd->sc_sw = scsi_switch;
X sd->ctlr = ctlr;
X sd->targ = targ;
X sd->lu = lu;
X sd->cmdscount = SDOUTSTANDING; /* XXX (ask the board) */
X
X
X i = sd->cmdscount;
X while(i-- )
X {
X sd_scsi_xfer[unit][i].next = sd_free_xfer[unit];
X sd_free_xfer[unit] = &sd_scsi_xfer[unit][i];
X }
X /*******************************************************\
X * Use the subdriver to request information regarding *
X * the drive. We cannot use interrupts yet, so the *
X * request must specify this. *
X \*******************************************************/
X sd_get_parms(unit, SCSI_NOSLEEP | SCSI_NOMASK);
X printf(" sd%d: %dMB, cyls %d, heads %d, secs %d, bytes/sec %d\n",
X unit,
X ( dp->cyls
X * dp->heads
X * dp->sectors
X * dp->secsiz
X )
X / (1024 * 1024),
X dp->cyls,
X dp->heads,
X dp->sectors,
X dp->secsiz);
X /*******************************************************\
X * Set up the bufs for this device *
X \*******************************************************/
X sd->flags |= SDINIT;
X sd->flags |= SDVALID;
X return;
X
X}
X
X
X
X/*******************************************************\
X* open the device. Make sure the partition info *
X* is a up-to-date as can be. *
X\*******************************************************/
Xsdopen(dev)
X{
X int errcode = 0;
X int unit, part;
X struct disk_parms disk_parms;
X struct sd_data *sd ;
X
X unit = UNIT(dev);
X part = PARTITION(dev);
X sd = sd_data + unit;
X if(scsi_debug & (PRINTROUTINES | TRACEOPENS))
X printf("sdopen: dev=0x%x (unit %d (of %d),partition %d)\n"
X , dev, unit, NSD, part);
X /*******************************************************\
X * Check the unit is legal *
X \*******************************************************/
X if ( unit >= NSD )
X {
X return(ENXIO);
X }
X /*******************************************************\
X * Make sure the disk has been initialised *
X * At some point in the future, get the scsi driver *
X * to look for a new device if we are not initted *
X \*******************************************************/
X if (! (sd->flags & SDINIT))
X {
X return(ENXIO);
X }
X
X /*******************************************************\
X * If it's been invalidated, and not everybody has *
X * closed it then forbid re-entry. *
X \*******************************************************/
X if ((! (sd->flags & SDVALID))
X && ( sd->openparts))
X return(ENXIO);
X /*******************************************************\
X * Check that it is still responding and ok. *
X \*******************************************************/
X
X if(scsi_debug & TRACEOPENS)
X printf("device is ");
X if (sd_req_sense(unit, 0) != 0)
X {
X if(scsi_debug & TRACEOPENS) printf("not reponding\n");
X return(ENXIO);
X }
X if(scsi_debug & TRACEOPENS)
X printf("ok\n");
X /*******************************************************\
X * In case it is a funny one, tell it to start *
X * not needed for hard drives *
X \*******************************************************/
X /*sd_start_unit(unit);
X if(scsi_debug & TRACEOPENS)
X printf("started ");*/
X /*******************************************************\
X * Load the physical device parameters *
X \*******************************************************/
X sd_get_parms(unit, 0);
X if (sd->params.secsiz != SECSIZE) {
X printf("sd%d: Can't deal with %d bytes logical blocks\n"
X ,unit, sd->params.secsiz);
X Debugger();
X return(ENXIO);
X }
X if(scsi_debug & TRACEOPENS)
X printf("Params loaded ");
X /*******************************************************\
X * Load the partition info if not already loaded *
X \*******************************************************/
X sdgetdisklabel(unit);
X if(scsi_debug & TRACEOPENS)
X printf("Disklabel loaded ");
X /*******************************************************\
X * Check the partition is legal *
X \*******************************************************/
X if ( part >= MAXPARTITIONS ) {
X return(ENXIO);
X }
X if(scsi_debug & TRACEOPENS)
X printf("ok");
X /*******************************************************\
X * Check that the partition exists *
X \*******************************************************/
X if (( sd->disklabel.d_partitions[part].p_fstype == FS_UNUSED )
X && (part != RAW_PART))
X {
X return(ENXIO);
X }
X sd->partflags[part] |= SDOPEN;
X sd->openparts |= (1 << part);
X if(scsi_debug & TRACEOPENS)
X printf("open %d %d\n",sdstrats,sdqueues);
X sd->flags |= SDVALID;
X return(0);
X}
X
X/*******************************************************\
X* Get ownership of a scsi_xfer *
X* If need be, sleep on it, until it comes free *
X\*******************************************************/
Xstruct scsi_xfer *sd_get_xs(unit,flags)
Xint flags;
Xint unit;
X{
X struct scsi_xfer *xs;
X int s;
X
X if(flags & (SCSI_NOSLEEP | SCSI_NOMASK))
X {
X if (xs = sd_free_xfer[unit])
X {
X sd_free_xfer[unit] = xs->next;
X xs->flags = 0;
X }
X }
X else
X {
X s = SPLSD();
X while (!(xs = sd_free_xfer[unit]))
X {
X sd_xfer_block_wait[unit]++; /* someone waiting! */
X sleep((caddr_t)&sd_free_xfer[unit], PRIBIO+1);
X sd_xfer_block_wait[unit]--;
X }
X sd_free_xfer[unit] = xs->next;
X splx(s);
X xs->flags = 0;
X }
X return(xs);
X}
X
X/*******************************************************\
X* Free a scsi_xfer, wake processes waiting for it *
X\*******************************************************/
Xsd_free_xs(unit,xs,flags)
Xstruct scsi_xfer *xs;
Xint unit;
Xint flags;
X{
X int s;
X
X if(flags & SCSI_NOMASK)
X {
X if (sd_xfer_block_wait[unit])
X {
X printf("doing a wakeup from NOMASK mode\n");
X wakeup((caddr_t)&sd_free_xfer[unit]);
X }
X xs->next = sd_free_xfer[unit];
X sd_free_xfer[unit] = xs;
X }
X else
X {
X s = SPLSD();
X if (sd_xfer_block_wait[unit])
X wakeup((caddr_t)&sd_free_xfer[unit]);
X xs->next = sd_free_xfer[unit];
X sd_free_xfer[unit] = xs;
X splx(s);
X }
X}
X
X/*******************************************************\
X* trim the size of the transfer if needed, *
X* called by physio *
X* basically the smaller of our max and the scsi driver's*
X* minphys (note we have no max) *
X\*******************************************************/
X/* Trim buffer length if buffer-size is bigger than page size */
Xvoid sdminphys(bp)
Xstruct buf *bp;
X{
X (*(sd_data[UNIT(bp->b_dev)].sc_sw->scsi_minphys))(bp);
X}
X
X/*******************************************************\
X* Actually translate the requested transfer into *
X* one the physical driver can understand *
X* The transfer is described by a buf and will include *
X* only one physical transfer. *
X\*******************************************************/
X
Xint sdstrategy(bp)
Xstruct buf *bp;
X{
X struct buf *dp;
X unsigned int opri;
X struct sd_data *sd ;
X int unit;
X
X sdstrats++;
X unit = UNIT((bp->b_dev));
X sd = sd_data + unit;
X if(scsi_debug & PRINTROUTINES) printf("\nsdstrategy ");
X if(scsi_debug & SHOWREQUESTS) printf("sd%d: %d bytes @ blk%d\n",
X unit,bp->b_bcount,bp->b_blkno);
X sdminphys(bp);
X /*******************************************************\
X * If the device has been made invalid, error out *
X \*******************************************************/
X if(!(sd->flags & SDVALID))
X {
X bp->b_error = EIO;
X goto bad;
X }
X /*******************************************************\
X * "soft" write protect check *
X \*******************************************************/
X if ((sd->flags & SDWRITEPROT) && (bp->b_flags & B_READ) == 0) {
X bp->b_error = EROFS;
X goto bad;
X }
X /*******************************************************\
X * If it's a null transfer, return immediatly *
X \*******************************************************/
X if (bp->b_bcount == 0)
X {
X goto done;
X }
X
X /*******************************************************\
X * Decide which unit and partition we are talking about *
X * only raw is ok if no label *
X \*******************************************************/
X if(PARTITION(bp->b_dev) != RAW_PART)
X {
X if (!(sd->flags & SDHAVELABEL))
X {
X bp->b_error = EIO;
X goto bad;
X }
X
X /*
X * do bounds checking, adjust transfer. if error, process.
X * if end of partition, just return
X */
X if (bounds_check_with_label(bp,&sd->disklabel,sd->wlabel) <= 0)
X goto done;
X /* otherwise, process transfer request */
X }
X
X opri = SPLSD();
X dp = &sd_buf_queue[unit];
X
X /*******************************************************\
X * Place it in the queue of disk activities for this disk*
X \*******************************************************/
X disksort(dp, bp);
X
X /*******************************************************\
X * Tell the device to get going on the transfer if it's *
X * not doing anything, otherwise just wait for completion*
X \*******************************************************/
X sdstart(unit);
X
X splx(opri);
X return;
Xbad:
X bp->b_flags |= B_ERROR;
Xdone:
X
X /*******************************************************\
X * Correctly set the buf to indicate a completed xfer *
X \*******************************************************/
X bp->b_resid = bp->b_bcount;
X biodone(bp);
X return;
X}
X
X/***************************************************************\
X* sdstart looks to see if there is a buf waiting for the device *
X* and that the device is not already busy. If both are true, *
X* It deques the buf and creates a scsi command to perform the *
X* transfer in the buf. The transfer request will call sd_done *
X* on completion, which will in turn call this routine again *
X* so that the next queued transfer is performed. *
X* The bufs are queued by the strategy routine (sdstrategy) *
X* *
X* This routine is also called after other non-queued requests *
X* have been made of the scsi driver, to ensure that the queue *
X* continues to be drained. *
X* *
X* must be called at the correct (highish) spl level *
X\***************************************************************/
X/* sdstart() is called at SPLSD from sdstrategy and sd_done*/
Xsdstart(unit)
Xint unit;
X{
X int drivecount;
X register struct buf *bp = 0;
X register struct buf *dp;
X struct scsi_xfer *xs;
X struct scsi_rw_big cmd;
X int blkno, nblk;
X struct sd_data *sd = sd_data + unit;
X struct partition *p ;
X
X if(scsi_debug & PRINTROUTINES) printf("sdstart%d ",unit);
X /*******************************************************\
X * See if there is a buf to do and we are not already *
X * doing one *
X \*******************************************************/
X if(!sd_free_xfer[unit])
X {
X return; /* none for us, unit already underway */
X }
X
X if(sd_xfer_block_wait[unit]) /* there is one, but a special waits */
X {
X return; /* give the special that's waiting a chance to run */
X }
X
X
X dp = &sd_buf_queue[unit];
X if ((bp = dp->b_actf) != NULL) /* yes, an assign */
X {
X dp->b_actf = bp->av_forw;
X }
X else
X {
X return;
X }
X
X xs=sd_get_xs(unit,0); /* ok we can grab it */
X xs->flags = INUSE; /* Now ours */
X
X /*******************************************************\
X * We have a buf, now we should move the data into *
X * a scsi_xfer definition and try start it *
X \*******************************************************/
X /*******************************************************\
X * First, translate the block to absolute *
X \*******************************************************/
X p = sd->disklabel.d_partitions + PARTITION(bp->b_dev);
X blkno = bp->b_blkno + p->p_offset;
X nblk = (bp->b_bcount + 511) >> 9;
X
X /*******************************************************\
X * Fill out the scsi command *
X \*******************************************************/
X bzero(&cmd, sizeof(cmd));
X cmd.op_code = (bp->b_flags & B_READ)
X ? READ_BIG : WRITE_BIG;
X cmd.addr_3 = (blkno & 0xff000000) >> 24;
X cmd.addr_2 = (blkno & 0xff0000) >> 16;
X cmd.addr_1 = (blkno & 0xff00) >> 8;
X cmd.addr_0 = blkno & 0xff;
X cmd.length2 = (nblk & 0xff00) >> 8;
X cmd.length1 = (nblk & 0xff);
X /*******************************************************\
X * Fill out the scsi_xfer structure *
X * Note: we cannot sleep as we may be an interrupt *
X \*******************************************************/
X xs->flags |= SCSI_NOSLEEP;
X xs->adapter = sd->ctlr;
X xs->targ = sd->targ;
X xs->lu = sd->lu;
X xs->retries = SD_RETRIES;
X xs->timeout = 10000;/* 10000 millisecs for a disk !*/
X xs->cmd = (struct scsi_generic *)&cmd;
X xs->cmdlen = sizeof(cmd);
X xs->resid = bp->b_bcount;
X xs->when_done = sd_done;
X xs->done_arg = unit;
X xs->done_arg2 = (int)xs;
X xs->error = XS_NOERROR;
X xs->bp = bp;
X xs->data = (u_char *)bp->b_un.b_addr;
X xs->datalen = bp->b_bcount;
X /*******************************************************\
X * Pass all this info to the scsi driver. *
X \*******************************************************/
X
X
X
X if ( (*(sd->sc_sw->scsi_cmd))(xs) != SUCCESSFULLY_QUEUED)
X {
X printf("sd%d: oops not queued",unit);
X xs->error = XS_DRIVER_STUFFUP;
X sd_done(unit,xs); /* clean up (calls sdstart) */
X }
X sdqueues++;
X}
X
X/*******************************************************\
X* This routine is called by the scsi interrupt when *
X* the transfer is complete.
X\*******************************************************/
Xint sd_done(unit,xs)
Xint unit;
Xstruct scsi_xfer *xs;
X{
X struct buf *bp;
X int retval;
X int retries = 0;
X
X if(scsi_debug & PRINTROUTINES) printf("sd_done%d ",unit);
X if (! (xs->flags & INUSE))
X panic("scsi_xfer not in use!");
X if(bp = xs->bp)
X {
X switch(xs->error)
X {
X case XS_NOERROR:
X bp->b_error = 0;
X bp->b_resid = 0;
X break;
X
X case XS_SENSE:
X retval = (sd_interpret_sense(unit,xs));
X if(retval)
X {
X bp->b_flags |= B_ERROR;
X bp->b_error = retval;
X }
X break;
X
X case XS_TIMEOUT:
X printf("sd%d timeout\n",unit);
X
X case XS_BUSY: /* should retry */ /* how? */
X /************************************************/
X /* SHOULD put buf back at head of queue */
X /* and decrement retry count in (*xs) */
X /* HOWEVER, this should work as a kludge */
X /************************************************/
X if(xs->retries--)
X {
X xs->error = XS_NOERROR;
X xs->flags &= ~ITSDONE;
X if ( (*(sd_data[unit].sc_sw->scsi_cmd))(xs)
X == SUCCESSFULLY_QUEUED)
X { /* don't wake the job, ok? */
X return;
X }
X xs->flags |= ITSDONE;
X } /* fall through */
X
X case XS_DRIVER_STUFFUP:
X bp->b_flags |= B_ERROR;
X bp->b_error = EIO;
X break;
X default:
X printf("sd%d: unknown error category from scsi driver\n"
X ,unit);
X }
X biodone(bp);
X sd_free_xs(unit,xs,0);
X sdstart(unit); /* If there's anything waiting.. do it */
X }
X else /* special has finished */
X {
X wakeup(xs);
X }
X}
X/*******************************************************\
X* Perform special action on behalf of the user *
X* Knows about the internals of this device *
X\*******************************************************/
Xsdioctl(dev_t dev, int cmd, caddr_t addr, int flag)
X{
X /* struct sd_cmd_buf *args;*/
X int error = 0;
X unsigned int opri;
X unsigned char unit, part;
X register struct sd_data *sd;
X
X
X /*******************************************************\
X * Find the device that the user is talking about *
X \*******************************************************/
X unit = UNIT(dev);
X part = PARTITION(dev);
X sd = &sd_data[unit];
X if(scsi_debug & PRINTROUTINES) printf("sdioctl%d ",unit);
X
X /*******************************************************\
X * If the device is not valid.. abandon ship *
X \*******************************************************/
X if (!(sd_data[unit].flags & SDVALID))
X return(EIO);
X switch(cmd)
X {
X
X case DIOCSBAD:
X error = EINVAL;
X break;
X
X case DIOCGDINFO:
X *(struct disklabel *)addr = sd->disklabel;
X break;
X
X case DIOCGPART:
X ((struct partinfo *)addr)->disklab = &sd->disklabel;
X ((struct partinfo *)addr)->part =
X &sd->disklabel.d_partitions[PARTITION(dev)];
X break;
X
X case DIOCSDINFO:
X if ((flag & FWRITE) == 0)
X error = EBADF;
X else
X error = setdisklabel(&sd->disklabel,
X (struct disklabel *)addr,
X /*(sd->flags & DKFL_BSDLABEL) ? sd->openparts : */0,
X sd->dosparts);
X if (error == 0) {
X sd->flags |= SDHAVELABEL;
X }
X break;
X
X case DIOCWLABEL:
X sd->flags &= ~SDWRITEPROT;
X if ((flag & FWRITE) == 0)
X error = EBADF;
X else
X sd->wlabel = *(int *)addr;
X break;
X
X case DIOCWDINFO:
X sd->flags &= ~SDWRITEPROT;
X if ((flag & FWRITE) == 0)
X error = EBADF;
X else
X {
X if ((error = setdisklabel(&sd->disklabel
X , (struct disklabel *)addr
X , /*(sd->flags & SDHAVELABEL) ? sd->openparts :*/ 0
X , sd->dosparts)) == 0)
X {
X int wlab;
X
X sd->flags |= SDHAVELABEL; /* ok write will succeed */
X
X /* simulate opening partition 0 so write succeeds */
X sd->openparts |= (1 << 0); /* XXX */
X wlab = sd->wlabel;
X sd->wlabel = 1;
X error = writedisklabel(dev, sdstrategy,
X &sd->disklabel, sd->dosparts);
X sd->wlabel = wlab;
X }
X }
X break;
X
X
X default:
X error = ENOTTY;
X break;
X }
X return (error);
X}
X
X
X/*******************************************************\
X* Load the label information on the named device *
X\*******************************************************/
Xint sdgetdisklabel(unit)
Xunsigned char unit;
X{
X /*unsigned int n, m;*/
X char *errstring;
X struct dos_partition *dos_partition_p;
X struct sd_data *sd = sd_data + unit;
X
X /*******************************************************\
X * If the inflo is already loaded, use it *
X \*******************************************************/
X if(sd->flags & SDHAVELABEL) return;
X
X bzero(&sd->disklabel,sizeof(struct disklabel));
X /*******************************************************\
X * make partition 3 the whole disk in case of failure *
X * then get pdinfo *
X \*******************************************************/
X sd->disklabel.d_partitions[RAW_PART].p_offset = 0;
X sd->disklabel.d_partitions[RAW_PART].p_size = sd->params.disksize;
X sd->disklabel.d_npartitions = MAXPARTITIONS;
X sd->disklabel.d_secsize = 512; /* as long as it's not 0 */
X sd->disklabel.d_secpercyl = 100; /* as long as it's not 0 */
X /* readdisklabel divides by it */
X
X /*******************************************************\
X * all the generic bisklabel extraction routine *
X \*******************************************************/
X if(errstring = readdisklabel(makedev(0 ,(unit<<UNITSHIFT )+3)
X , sdstrategy
X , &sd->disklabel
X , sd->dosparts
X , 0
X , 0))
X {
X printf("sd%d: %s\n",unit, errstring);
X return(ENXIO);
X }
X /*******************************************************\
X * leave partition 2 "open" for raw I/O *
X \*******************************************************/
X
X sd->flags |= SDHAVELABEL; /* WE HAVE IT ALL NOW */
X return(ESUCCESS);
X}
X
X/*******************************************************\
X* Find out from the device what it's capacity is *
X\*******************************************************/
Xsd_size(unit, flags)
X{
X struct scsi_read_cap_data rdcap;
X struct scsi_read_capacity scsi_cmd;
X int size;
X
X /*******************************************************\
X * make up a scsi command and ask the scsi driver to do *
X * it for you. *
X \*******************************************************/
X bzero(&scsi_cmd, sizeof(scsi_cmd));
X scsi_cmd.op_code = READ_CAPACITY;
X
X /*******************************************************\
X * If the command works, interpret the result as a 4 byte*
X * number of blocks *
X \*******************************************************/
X if (sd_scsi_cmd(unit,
X &scsi_cmd,
X sizeof(scsi_cmd),
X &rdcap,
X sizeof(rdcap),
X 2000,
X flags) != 0)
X {
X printf("could not get size of unit %d\n", unit);
X return(0);
X } else {
X size = rdcap.addr_0 + 1 ;
X size += rdcap.addr_1 << 8;
X size += rdcap.addr_2 << 16;
X size += rdcap.addr_3 << 24;
X }
X return(size);
X}
X
X/*******************************************************\
X* Check with the device that it is ok, (via scsi driver)*
X\*******************************************************/
Xsd_req_sense(unit, flags)
X{
X char out_buf[18];
X struct scsi_sense scsi_cmd;
X
X bzero(&scsi_cmd, sizeof(scsi_cmd));
X scsi_cmd.op_code = REQUEST_SENSE;
X scsi_cmd.length = 18;
X
X return (sd_scsi_cmd(unit,
X &scsi_cmd,
X sizeof(struct scsi_sense),
X out_buf,
X sizeof(out_buf),
X 2000,
X flags));
X}
X
X/*******************************************************\
X* Get scsi driver to send a "start up" command *
X\*******************************************************/
Xsd_start_unit(unit)
X{
X struct scsi_start_stop scsi_cmd;
X
X bzero(&scsi_cmd, sizeof(scsi_cmd));
X scsi_cmd.op_code = START_STOP;
X scsi_cmd.start = 1;
X
X return (sd_scsi_cmd(unit,
X &scsi_cmd,
X sizeof(scsi_cmd),
X 0,
X 0,
X 2000,
X 0));
X}
X
X/*******************************************************\
X* Tell the device to map out a defective block *
X\*******************************************************/
Xsd_reassign_blocks(unit,block)
X{
X struct scsi_reassign_blocks scsi_cmd;
X struct scsi_reassign_blocks_data rbdata;
X
X
X bzero(&scsi_cmd, sizeof(scsi_cmd));
X bzero(&rbdata, sizeof(rbdata));
X scsi_cmd.op_code = REASSIGN_BLOCKS;
X
X rbdata.length_msb = 0;
X rbdata.length_lsb = sizeof(rbdata.defect_descriptor[0]);
X rbdata.defect_descriptor[0].dlbaddr_3 = ((block >> 24) & 0xff);
X rbdata.defect_descriptor[0].dlbaddr_2 = ((block >> 16) & 0xff);
X rbdata.defect_descriptor[0].dlbaddr_1 = ((block >> 8) & 0xff);
X rbdata.defect_descriptor[0].dlbaddr_0 = ((block ) & 0xff);
X
X return(sd_scsi_cmd(unit,
X &scsi_cmd,
X sizeof(scsi_cmd),
X &rbdata,
X sizeof(rbdata),
X 5000,
X 0));
X}
X
X#define b2tol(a) (((unsigned)(a##_1) << 8) + (unsigned)a##_0 )
X
X/*******************************************************\
X* Get the scsi driver to send a full inquiry to the *
X* device and use the results to fill out the disk *
X* parameter structure. *
X\*******************************************************/
X
Xint sd_get_parms(unit, flags)
X{
X struct sd_data *sd = sd_data + unit;
X struct disk_parms *disk_parms = &sd->params;
X struct scsi_mode_sense scsi_cmd;
X struct scsi_mode_sense_data
X {
X struct scsi_mode_header header;
X struct blk_desc blk_desc;
X union disk_pages pages;
X }scsi_sense;
X int sectors;
X
X /*******************************************************\
X * First check if we have it all loaded *
X \*******************************************************/
X if(sd->flags & SDVALID) return(0);
X /*******************************************************\
X * First do a mode sense page 3 *
X \*******************************************************/
X bzero(&scsi_cmd, sizeof(scsi_cmd));
X scsi_cmd.op_code = MODE_SENSE;
X scsi_cmd.page_code = 3;
X scsi_cmd.length = 0x24;
X /*******************************************************\
X * do the command, but we don't need the results *
X * just print them for our interest's sake *
X \*******************************************************/
X if (sd_debug)
X {
X if (sd_scsi_cmd(unit,
X &scsi_cmd,
X sizeof(scsi_cmd),
X &scsi_sense,
X sizeof(scsi_sense),
X 2000,
X flags) != 0)
X {
X printf("could not mode sense (3) for unit %d\n", unit);
X sd->flags &= ~SDVALID; /* invalidated held info */
X return(ENXIO);
X }
X printf("unit %d: %d trk/zone, %d alt_sec/zone, %d alt_trk/zone, %d alt_trk/lun\n",
X unit,
X b2tol(scsi_sense.pages.disk_format.trk_z),
X b2tol(scsi_sense.pages.disk_format.alt_sec),
X b2tol(scsi_sense.pages.disk_format.alt_trk_z),
X b2tol(scsi_sense.pages.disk_format.alt_trk_v));
X printf(" %d sec/trk, %d bytes/sec, %d interleave, %d %d bytes/log_blk\n",
X b2tol(scsi_sense.pages.disk_format.ph_sec_t),
X b2tol(scsi_sense.pages.disk_format.bytes_s),
X b2tol(scsi_sense.pages.disk_format.interleave),
X sd_size(unit, flags),
X _3btol(scsi_sense.blk_desc.blklen));
X }
X
X
X /*******************************************************\
X * do a "mode sense page 4" *
X \*******************************************************/
X bzero(&scsi_cmd, sizeof(scsi_cmd));
X scsi_cmd.op_code = MODE_SENSE;
X scsi_cmd.page_code = 4;
X scsi_cmd.length = 0x20;
X /*******************************************************\
X * If the command worked, use the results to fill out *
X * the parameter structure *
X \*******************************************************/
X if (sd_scsi_cmd(unit,
X &scsi_cmd,
X sizeof(scsi_cmd),
X &scsi_sense,
X sizeof(scsi_sense),
X 2000,
X flags) != 0)
X {
X printf("could not mode sense (4) for unit %d\n", unit);
X sd->flags &= ~SDVALID; /* invalidated held info */
X return(ENXIO);
X }
X
X if (sd_debug)
X printf(" %d cyls, %d heads, %d precomp, %d red_write, %d land_zone\n",
X _3btol(&scsi_sense.pages.rigid_geometry.ncyl_2),
X scsi_sense.pages.rigid_geometry.nheads,
X b2tol(scsi_sense.pages.rigid_geometry.st_cyl_wp),
X b2tol(scsi_sense.pages.rigid_geometry.st_cyl_rwc),
X b2tol(scsi_sense.pages.rigid_geometry.land_zone));
X
X /*******************************************************\
X * give a number of sectors so that sec * trks * cyls *
X * is <= disk_size *
X \*******************************************************/
X disk_parms->heads = scsi_sense.pages.rigid_geometry.nheads;
X disk_parms->cyls = _3btol(&scsi_sense.pages.rigid_geometry.ncyl_2);
X disk_parms->secsiz = _3btol(&scsi_sense.blk_desc.blklen);
X
X sectors = sd_size(unit, flags) * disk_parms->secsiz;
X sectors /= SECSIZE;
X sectors /= disk_parms->cyls;
X sectors /= disk_parms->heads;
X disk_parms->sectors = sectors; /* dubious on SCSI*/
X disk_parms->secsiz = SECSIZE;
X
X sd->flags |= SDVALID;
X return(0);
X}
X
X/*******************************************************\
X* close the device.. only called if we are the LAST *
X* occurence of an open device *
X\*******************************************************/
Xsdclose(dev)
Xdev_t dev;
X{
X unsigned char unit, part;
X unsigned int old_priority;
X
X unit = UNIT(dev);
X part = PARTITION(dev);
X sd_data[unit].partflags[part] &= ~SDOPEN;
X sd_data[unit].openparts &= ~(1 << part);
X return(0);
X}
X
X/*******************************************************\
X* ask the scsi driver to perform a command for us. *
X* Call it through the switch table, and tell it which *
X* sub-unit we want, and what target and lu we wish to *
X* talk to. Also tell it where to find the command *
X* how long int is. *
X* Also tell it where to read/write the data, and how *
X* long the data is supposed to be *
X\*******************************************************/
Xint sd_scsi_cmd(unit,scsi_cmd,cmdlen,data_addr,datalen,timeout,flags)
X
Xint unit,flags;
Xstruct scsi_generic *scsi_cmd;
Xint cmdlen;
Xint timeout;
Xu_char *data_addr;
Xint datalen;
X{
X struct scsi_xfer *xs;
X int retval;
X int s;
X struct sd_data *sd = sd_data + unit;
X
X if(scsi_debug & PRINTROUTINES) printf("\nsd_scsi_cmd%d ",unit);
X if(sd->sc_sw) /* If we have a scsi driver */
X {
X xs = sd_get_xs(unit,flags); /* should wait unless booting */
X if(!xs)
X {
X printf("sd_scsi_cmd%d: controller busy"
X " (this should never happen)\n",unit);
X return(EBUSY);
X }
X xs->flags |= INUSE;
X /*******************************************************\
X * Fill out the scsi_xfer structure *
X \*******************************************************/
X xs->flags |= flags;
X xs->adapter = sd->ctlr;
X xs->targ = sd->targ;
X xs->lu = sd->lu;
X xs->retries = SD_RETRIES;
X xs->timeout = timeout;
X xs->cmd = scsi_cmd;
X xs->cmdlen = cmdlen;
X xs->data = data_addr;
X xs->datalen = datalen;
X xs->resid = datalen;
X xs->when_done = (flags & SCSI_NOMASK)
X ?(int (*)())0
X :sd_done;
X xs->done_arg = unit;
X xs->done_arg2 = (int)xs;
Xretry: xs->error = XS_NOERROR;
X xs->bp = 0;
X retval = (*(sd->sc_sw->scsi_cmd))(xs);
X switch(retval)
X {
X case SUCCESSFULLY_QUEUED:
X while(!(xs->flags & ITSDONE))
X sleep(xs,PRIBIO+1);
X
X case HAD_ERROR:
X /*printf("err = %d ",xs->error);*/
X switch(xs->error)
X {
X case XS_NOERROR:
X retval = ESUCCESS;
X break;
X case XS_SENSE:
X retval = (sd_interpret_sense(unit,xs));
X break;
X case XS_DRIVER_STUFFUP:
X retval = EIO;
X break;
X case XS_TIMEOUT:
X if(xs->retries-- )
X {
X xs->flags &= ~ITSDONE;
X goto retry;
X }
X retval = EIO;
X break;
X case XS_BUSY:
X if(xs->retries-- )
X {
X xs->flags &= ~ITSDONE;
X goto retry;
X }
X retval = EIO;
X break;
X default:
X retval = EIO;
X printf("sd%d: unknown error category from scsi driver\n"
X ,unit);
X }
X break;
X case COMPLETE:
X retval = ESUCCESS;
X break;
X case TRY_AGAIN_LATER:
X if(xs->retries-- )
X {
X xs->flags &= ~ITSDONE;
X goto retry;
X }
X retval = EIO;
X break;
X default:
X retval = EIO;
X }
X sd_free_xs(unit,xs,flags);
X sdstart(unit); /* check if anything is waiting fr the xs */
X }
X else
X {
X printf("sd%d: not set up\n",unit);
X return(EINVAL);
X }
X return(retval);
X}
X/***************************************************************\
X* Look at the returned sense and act on the error and detirmine *
X* The unix error number to pass back... (0 = report no error) *
X\***************************************************************/
X
Xint sd_interpret_sense(unit,xs)
Xint unit;
Xstruct scsi_xfer *xs;
X{
X struct scsi_sense_data *sense;
X int key;
X int silent;
X
X /***************************************************************\
X * If the flags say errs are ok, then always return ok. *
X \***************************************************************/
X if (xs->flags & SCSI_ERR_OK) return(ESUCCESS);
X silent = (xs->flags & SCSI_SILENT);
X
X sense = &(xs->sense);
X switch(sense->error_class)
X {
X case 7:
X {
X key=sense->ext.extended.sense_key;
X switch(key)
X {
X case 0x0:
X return(ESUCCESS);
X case 0x1:
X if(!silent)
X {
X printf("sd%d: soft error(corrected) ", unit);
X if(sense->valid)
X {
X printf("block no. %d (decimal)",
X (sense->ext.extended.info[0] <<24),
X (sense->ext.extended.info[1] <<16),
X (sense->ext.extended.info[2] <<8),
X (sense->ext.extended.info[3] ));
X }
X printf("\n");
X }
X return(ESUCCESS);
X case 0x2:
X if(!silent)printf("sd%d: not ready\n ",
X unit);
X return(ENODEV);
X case 0x3:
X if(!silent)
X {
X printf("sd%d: medium error ", unit);
X if(sense->valid)
X {
X printf("block no. %d (decimal)",
X (sense->ext.extended.info[0] <<24),
X (sense->ext.extended.info[1] <<16),
X (sense->ext.extended.info[2] <<8),
X (sense->ext.extended.info[3] ));
X }
X printf("\n");
X }
X return(EIO);
X case 0x4:
X if(!silent)printf("sd%d: non-media hardware failure\n ",
X unit);
X return(EIO);
X case 0x5:
X if(!silent)printf("sd%d: illegal request\n ",
X unit);
X return(EINVAL);
X case 0x6:
X if((sd_data[unit].flags & SDVALID)
X && (sd_data[unit].openparts))
X {
X sd_data[unit].flags & ~(SDVALID | SDHAVELABEL);
X if(!silent)printf("sd%d: Unit attention.\n ",
X unit);
X return(EIO);
X }
X return(ESUCCESS);
X case 0x7:
X if(!silent)
X {
X printf("sd%d: attempted protection violation ",
X unit);
X if(sense->valid)
X {
X printf("block no. %d (decimal)\n",
X (sense->ext.extended.info[0] <<24),
X (sense->ext.extended.info[1] <<16),
X (sense->ext.extended.info[2] <<8),
X (sense->ext.extended.info[3] ));
X }
X printf("\n");
X }
X return(EACCES);
X case 0x8:
X if(!silent)
X {
X printf("sd%d: block wrong state (worm)\n ",
X unit);
X if(sense->valid)
X {
X printf("block no. %d (decimal)\n",
X (sense->ext.extended.info[0] <<24),
X (sense->ext.extended.info[1] <<16),
X (sense->ext.extended.info[2] <<8),
X (sense->ext.extended.info[3] ));
X }
X printf("\n");
X }
X return(EIO);
X case 0x9:
X if(!silent)printf("sd%d: vendor unique\n",
X unit);
X return(EIO);
X case 0xa:
X if(!silent)printf("sd%d: copy aborted\n ",
X unit);
X return(EIO);
X case 0xb:
X if(!silent)printf("sd%d: command aborted\n ",
X unit);
X return(EIO);
X case 0xc:
X if(!silent)
X {
X printf("sd%d: search returned\n ",
X unit);
X if(sense->valid)
X {
X printf("block no. %d (decimal)\n",
X (sense->ext.extended.info[0] <<24),
X (sense->ext.extended.info[1] <<16),
X (sense->ext.extended.info[2] <<8),
X (sense->ext.extended.info[3] ));
X }
X printf("\n");
X }
X return(ESUCCESS);
X case 0xd:
X if(!silent)printf("sd%d: volume overflow\n ",
X unit);
X return(ENOSPC);
X case 0xe:
X if(!silent)
X {
X printf("sd%d: verify miscompare\n ",
X unit);
X if(sense->valid)
X {
X printf("block no. %d (decimal)\n",
X (sense->ext.extended.info[0] <<24),
X (sense->ext.extended.info[1] <<16),
X (sense->ext.extended.info[2] <<8),
X (sense->ext.extended.info[3] ));
X }
X printf("\n");
X }
X return(EIO);
X case 0xf:
X if(!silent)printf("sd%d: unknown error key\n ",
X unit);
X return(EIO);
X }
X break;
X }
X case 0:
X case 1:
X case 2:
X case 3:
X case 4:
X case 5:
X case 6:
X {
X if(!silent)printf("sd%d: error class %d code %d\n",
X unit,
X sense->error_class,
X sense->error_code);
X if(sense->valid)
X if(!silent)printf("block no. %d (decimal)\n",
X (sense->ext.unextended.blockhi <<16),
X + (sense->ext.unextended.blockmed <<8),
X + (sense->ext.unextended.blocklow ));
X }
X return(EIO);
X }
X}
X
X
X
X
Xint
Xsdsize(dev_t dev)
X{
X int unit = UNIT(dev), part = PARTITION(dev), val;
X struct sd_data *sd;
X
X if (unit >= NSD)
X return(-1);
X
X sd = &sd_data[unit];
X if((sd->flags & SDINIT) == 0) return(-1);
X if (sd == 0 || (sd->flags & SDHAVELABEL) == 0)
X val = sdopen (MAKESDDEV(major(dev), unit, RAW_PART), FREAD, S_IFBLK, 0);
X if ( val != 0 || sd->flags & SDWRITEPROT)
X return (-1);
X
X return((int)sd->disklabel.d_partitions[part].p_size);
X}
X
Xsddump()
X{
X printf("sddump() -- not implemented\n");
X return(-1);
X}
X
X
X
X/*
X * from:@(#)wd.c 7.2 (Berkeley) 5/9/91
X */
X
X/* TODO:peel out buffer at low ipl, speed improvement */
X
X
X#if NWD > 0
X
X#include "machine/cpu.h"
X#include "i386/isa/isa_device.h"
X#include "i386/isa/icu.h"
X#include "i386/isa/wdreg.h"
X#include "syslog.h"
X#include "vm/vm.h"
X
X
X#define wdnoreloc(dev) (minor(dev) & 0x80) /* ignore partition table */
X#define wddospart(dev) (minor(dev) & 0x40) /* use dos partitions */
X#define WDRAW 3 /* 'd' partition isn't a partition! */
X
X#define b_cylin b_resid /* cylinder number for doing IO to */
X /* shares an entry in the buf struct */
X
Xwdattach(dev)
X{
X du = wddrives[unit] = (struct disk *)
X malloc (sizeof(struct disk), M_TEMP, M_NOWAIT);
X du->dk_unit = unit;
X du->dk_port = dvp->id_iobase;
X}
X
X
Xextern char *vmmap; /* poor name! */
X
Xint
Xwddump(dev_t dev) /* dump core after a system crash */
X{
X register struct disk *sd; /* disk unit to do the IO */
X register struct bt_bad *bt_ptr;
X long num; /* number of sectors to write */
X int unit, part, wdc;
X long blkoff, blknum, blkcnt;
X long cylin, head, sector, stat;
X long secpertrk, secpercyl, nblocks, i;
X char *addr;
X extern int Maxmem;
X static wddoingadump = 0 ;
X extern caddr_t CADDR1;
X
X addr = (char *) 0; /* starting address */
X
X /* toss any characters present prior to dump */
X while (sgetc(1))
X ;
X
X /* size of memory to dump */
X num = Maxmem;
X unit = UNIT(dev); /* eventually support floppies? */
X part = PARTITION(dev); /* file system */
X /* check for acceptable drive number */
X if (unit >= _NWD) return(ENXIO);
X
X sd = wddrives[unit];
X if (sd == 0) return(ENXIO);
X /* was it ever initialized ? */
X if (sd->dk_state < OPEN) return (ENXIO) ;
X if (sd->flags & DKFL_WRITEPROT) return(ENXIO);
X wdc = sd->dk_port;
X
X /* Convert to disk sectors */
X num = (u_long) num * NBPG / sd->disklabel.d_secsize;
X
X /* check if controller active */
X /*if (wdtab.b_active) return(EFAULT); */
X if (wddoingadump) return(EFAULT);
X
X nblocks = sd->disklabel.d_partitions[part].p_size;
X blkoff = sd->disklabel.d_partitions[part].p_offset;
X
X/*pg("xunit %x, nblocks %d, dumplo %d num %d\n", part,nblocks,dumplo,num);*/
X /* check transfer bounds against partition size */
X if ((dumplo < 0) || ((dumplo + num) > nblocks))
X return(EINVAL);
X
X /*wdtab.b_active = 1; /* mark controller active for if we
X panic during the dump */
X wddoingadump = 1 ; i = 100000 ;
X
X blknum = dumplo + blkoff;
X while (num > 0) {
X pmap_enter(kernel_pmap, CADDR1, trunc_page(addr), VM_PROT_READ, TRUE);
X
X
X /* error check the xfer */
X
X if ((unsigned)addr % (1024*1024) == 0) printf("%d ", num/2048) ;
X /* update block count */
X num--;
X blknum++ ;
X (int) addr += 512;
X
X /* operator aborting dump? */
X if (sgetc(1))
X return(EINTR);
X }
X return(0);
X}
X#endif
X
X
END-of-scsi/sd.c
exit