Return to BSD News archive
#! rnews 2470 bsd Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!simtel!news.kei.com!newsfeed.internetmci.com!in2.uu.net!news.gun.de!knobel.gun.de!usenet From: andreas@knobel.gun.de (Andreas Klemm) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Hp laserjet 4L Date: 19 Nov 1995 23:33:05 GMT Lines: 44 Message-ID: <48oerh$1n0@knobel.gun.de> References: <Pine.BSF.3.91.951103130351.7968A-100000@taz.flnet.com> <imgidataDHK019.1qH@netcom.com> NNTP-Posting-Host: knobel.gun.de X-Newsreader: knews 0.9.3 In-Reply-To: <imgidataDHK019.1qH@netcom.com> To: imgidata@netcom.com (Robert Fagen) In article <imgidataDHK019.1qH@netcom.com>, imgidata@netcom.com (Robert Fagen) writes: >jones (jones@taz.flnet.com) wrote: >: I have a laserjet 4. in freebsd. I have been told that you can use the >: line printer demon to access the printer. I went through all the bs >: uncommenting out the original printcap file inserting the directory. ok >: all this worked also unhasshed the lp statement in the config file. All >: this is at the defaults. Ok the system rebooted and everything seemed ok >: untill i tried to print a file out. I used lpr filename, the file went >: into the spooler and was qued. Ok the printer fired up and I thought it >: was goin to print, but alas it only printed blank pages. > >: If anyone else has gone through this I would appreciate your >: wisdom. Ohh the system is intel based pc. > >: Thanks in adv. >: jones@taz.flnet.com > > >I think the problem is CR/LF mapping. I have the same problem. I wrote >a filter to reference in the /etc/printcap file. I hope someone else will >follow up with a better way to deal with this, but if not, here's the >code: Some days ago apsfilter-4.9.2 was put into the FreeBSD ports section. I think, this is what you need ... Grab the ports files, type make, this will grab the "sources" from wcarchive. After installation SETUP is called automatically, which creates a printcap suitable for apsfilter && your printer. After that you'll have definitively a Postscript printer ;-) 'cause apsfilter is a magic print filter ... Andreas /// -- andreas@knobel.gun.de /\/\___ Wiechers & Partner Datentechnik GmbH Andreas Klemm ___/\/\/ - Support Unix - aklemm@wup.de - \/ ftp://sunsite.unc.edu/pub/Linux/system/Printing/aps-491.tgz apsfilter - magic print filter 4lpd >>> knobel is powered by FreeBSD <<<