Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!news.hawaii.edu!ames!usenet.kornet.nm.kr!xpat.postech.ac.kr!news.kreonet.re.kr!news.hnc.net!orange!jedi
From: jedi@hncnet.co.kr (Joohyee Lee)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: PS/2 Mouse doesn't work.
Date: 20 Jan 1996 01:55:57 GMT
Organization: HNC Internet Service (HIS)
Lines: 178
Message-ID: <4dpi3d$cb0@apple.hnc.net>
NNTP-Posting-Host: orange.hnc.net
X-Newsreader: TIN [version 1.2 PL2]
Hi.
I have been used linux for several month at office but I moved
to FreeBSD 2.1 this year. Everything goes well but the mouse doesn't work.
I configured my kernel to PS/2 mouse and got dmesg here.
Please somebody tell me what's wrong and what must I add to kernel
config and what can I remove from kernel config. I want to remove every
unused code from kernel. Please don't mention about LAN card dmesg says here.
Conclusion : Kernel doesn't detect PS/2 mouse. Somebody please help me
to detect it.
dmesg goes here-------------------------------------------------
FreeBSD 2.1.0-RELEASE #0: Fri Jan 19 08:11:27 1996
root@myname.my.domain:/usr/src/sys/compile/AHA2940
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 33554432 (32768K bytes)
avail memory = 30826496 (30104K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
1 3C5x9 board(s) on ISA found at 0x320
ep0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the PCI bus:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
chip1 <Intel 82371 (Triton)> rev 2 on pci0:7
pci0:17: Intel Corporation, device=0x1227, class=network (ethernet) [no driver assigned]
vga0 <VGA-compatible display device> rev 0 int a irq 10 on pci0:18
ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 9 on pci0:19
ahc0: 2940 Single Channel, SCSI Id=7, aic7870, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "IMPRIMIS 94601-15 4614" type 0 fixed SCSI 1
sd0(ahc0:0:0): Direct-Access 992MB (2031705 512 byte sectors)
(ahc0:2:0): "TOSHIBA CD-ROM XM-3401TA 2873" type 5 removable SCSI 2
cd0(ahc0:2:0): CD-ROM cd present.[325252 x 2048 byte records]
=======================================================================
Kernel config goes here.===============================================
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident GENERIC
maxusers 10
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on sd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
#controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#device wcd0 #IDE CD-ROM
#controller ncr0
controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller ahc1 at isa? bio irq ? vector ahcintr
#controller ahb0 at isa? bio irq ? vector ahbintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
options XSERVER # include code for XFree86
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
#device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device lpt2 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
==============================================================================