Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.bhp.com.au!mel.dit.csiro.au!munnari.OZ.AU!news.ecn.uoknor.edu!paladin.american.edu!gatech!newsfeed.internetmci.com!btnet!zetnet.co.uk!usenet From: phil.burden@zetnet.co.uk (Philip Burden) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Mitsumi FX300 CDROM and 2.1.0R Date: Sat, 13 Jan 1996 21:56:59 GMT Lines: 24 Message-ID: <4d99tp$4vg@irk.zetnet.co.uk> References: <4d94di$i53@lyra.csx.cam.ac.uk> NNTP-Posting-Host: victoria.zetnet.co.uk In message <4d94di$i53@lyra.csx.cam.ac.uk> gi101@cus.cam.ac.uk (G. Ioannou) writes: > Has anybody managed to get 2.1.0 RELEASE to recognize the Mitsumi > FX300 ATAPI IDE CD-ROM? I've been trying all sorts of hardware > rearrangements and boot configurations but with no success. > My system is a 486DX33 with 8M RAM, one 210M IDE hard drive, one > 1.1G EIDE drive, and I have the two hard disks connected to the > primary controller on the EIDE card, and the CD-ROM connected to > the secondary controller. This works with DOS, with the CD-ROM > in either slave or master configuration. I've tried both master > and slave, different combinations with the two hard disks, disabled > all non-essential devices during boot, but still no success. > Any ideas? not the FX300,but I have got the FX400 working with 2.1,set up as a master on the secondary controller.It took me a while to make my own kernel for it,but it works,which,being a total newbie to Unix & FreeBSD,is quite a feat,for me <grin>. P.