Return to BSD News archive
Newsgroups: comp.unix.bsd.freebsd.misc Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!news.ecn.uoknor.edu!paladin.american.edu!gatech!newsfeed.internetmci.com!howland.reston.ans.net!ix.netcom.com!netcom.com!mitch4 From: mitch4@netcom.com (mitch goldstrom) Subject: Re: Problems w/ User PPP Message-ID: <mitch4DLCH6y.5HG@netcom.com> Organization: NETCOM On-line Communication Services (408 261-4700 guest) X-Newsreader: TIN [version 1.2 PL1] References: <4da13l$ha9@swen.emba.uvm.edu> <4dj9mf$6rg@helena.MT.net> Date: Wed, 17 Jan 1996 21:32:58 GMT Lines: 97 Sender: mitch4@netcom5.netcom.com I am having the same problem. Here is my output: Script started on Tue Jan 16 09:37:49 1996 firewall# ppp User Process PPP. Written by Toshiharu OHNO. Log level is 02 can't open /etc/ppp/ppp.secret. Warning: No password entry for this host in ppp.secret Warning: All manipulation is allowed by anyone in the world Using interface: tun0 Interactive mode ppp ON firewall> dial provider dial OK! login OK! ppp ON firewall> Packet mode. ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> show display Current configuration option settings.. Name My Side His Side ---------------------------------------- vjcomp enable accept lqr disable deny chap disable accept pap disable accept acfcomp enable accept protocomp enable accept pred1 enable accept proxy enable accept ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> show route 50.0.0.0 6.0.0.0 00000000 U (2) 50.0.0.199 6.0.6.0 ffffffff UH (3) 50.0.0.255 6.0.0.0 ffffffff UH (2) 127.0.0.1 127.0.0.1 ffffffff UH (3) 206.234.93.1 127.0.0.1 ffffffff UGH (3) ppp ON firewall> show proto Protocol in out Protocol in out IP : 0, 0 VJ_UNCOMP: 0, 0 VJ_COMP : 0, 0 COMPD : 0, 0 LCP : 0, 0 IPCP : 0, 0 CCP : 0, 0 PAP : 0, 0 LQR : 0, 0 CHAP : 0, 0 Others : 0, 0 ppp ON firewall> show modem device: /dev/cuaa1 speed: 9600 cs8, none parity connect count: 1 outq: 0 outqlen: 0 DialScript = ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" ATL3M1E1Q0 OK-AT-OK \dATDT\T TIMEOUT 20 CONNECT LoginScript = TIMEOUT 10 gin:-BREAK-gin: XXXX word: XXXXX PhoneNumber = 9,5645678 ppp ON firewall> ppp ON firewall> ppp ON firewall> ppp ON firewall> quit firewall# ^Dexit Script done on Tue Jan 16 09:40:55 1996 ------------------------------------------------------------ Nate Williams (nate@trout.sri.MT.net) wrote: : In article <4da13l$ha9@swen.emba.uvm.edu>, : Todd Huss <huss@emba-news.uvm.edu> wrote: : >I'm trying to use User Space PPP with FreeBSD 2.1.0. I've recompiled the : [ User-PPP ] : >I noticed in the PPP man page, it says when it starts talking PPP, that : >the prompt ppp on hostname switches to capital letters which it does not : >to on my machine. If it's switching to packet mode though isn't the ppp : >connection pretty much established? Thanks for any help or suggestions. : Are you sure it's switched to packet mode? What do your routes look like? : Nate : -- : nate@sneezy.sri.com | Research Engineer, SRI Intl. - Montana Operations : nate@trout.sri.MT.net | Loving life in God's country, the great state of : work #: (406) 449-7662 | Montana. : home #: (406) 443-7063 | A fly pole and a 4x4 Chevy truck = Heaven on Earth -- ------------------------------------------------------------ Mitch Goldstrom Visual f/x Inc. mitch4@netcom.com Work: (310) 475-4959 Narf! Fax: (310) 475-2878 How cold is it where you are?? ------------------------------------------------------------