Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!news.ecn.uoknor.edu!paladin.american.edu!gatech!news.mathworks.com!tank.news.pipex.net!pipex!lade.news.pipex.net!pipex!tube.news.pipex.net!pipex!dish.news.pipex.net!pipex!news00.sunet.se!sunic!news99.sunet.se!nntp-trd.UNINETT.no!nntp.uib.no!usenet From: s569@mygg.ii.uib.no (Tom Skoglund) Newsgroups: comp.unix.bsd.netbsd.misc Subject: Problem with X and S3 Date: 20 Jan 1996 03:33:15 GMT Organization: University of Bergen, Norway Lines: 62 Message-ID: <S569.96Jan20043316@mygg.ii.uib.no> NNTP-Posting-Host: mygg.ii.uib.no I am having som severe problems getting X to work now. I have a SPEA Mercury P64 (S3) card with 2 megs VRAM. After lots of trying this is about the closest I came to make it work. I had to set the clock chip manually, but... --------- startx.log ------- XFree86 Version 3.1 / X Window System (protocol Version 11, revision 0, vendor release 6000) Operating System: NetBSD 1.0_BETA Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) mmio_928, s3_generic Using pccons driver with X support XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) Mouse: type: Microsoft, device: /dev/com1, baudrate: 1200, 3 button emulation (**) S3: Graphics device ID: "SPEA Mercury 64" (**) S3: Monitor ID: "Cube" Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) S3: card type: PCI (--) S3: chipset: 964 rev. 0 (--) S3: chipset driver: mmio_928 (--) S3: videoram: 2048k (--) S3: Detected an AT&T 20C505 RAMDAC (--) S3: Ramdac type: att20c505 (--) S3: Ramdac speed: 135 (**) S3: Using ICD2061A programmable clock (--) S3: Maximum allowed dot-clock: 135.000 MHz (**) S3: Mode "1024x768": mode clock = 75.000 (--) S3: Operating RAMDAC in pixel multiplex mode (--) S3: Using hardware cursor from Bt485/20C505 RAMDAC (**) S3: Using 16 bpp. Color weight: 565 (**) S3: Virtual resolution set to 1024x768 (--) S3: Local bus LAW is 0xF3000000 (--) S3: Using a banksize of 2048k, line width of 1024 (--) S3: Using a single 64x64 area for expanding pixmaps (--) S3: Using 16 planes of 960x256 at (0,768) aligned 8 as font cache PEXExtensionInit: Couldn't open default PEX font file Roman_M Fatal server error: Cannot open mouse (No such file or directory) X connection to :0.0 broken (explicit kill or server shutdown). -------- Anyone got any ideas ??? -Tom -- \\\ Tom Skoglund *** Team OS/2 /// \\ s569@ii.uib.no //