Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!bunyip.cc.uq.oz.au!munnari.OZ.AU!news.ecn.uoknor.edu!paladin.american.edu!zombie.ncsc.mil!news.mathworks.com!newsfeed.internetmci.com!ns.pilot.net!news2.pilot.net!wrs.com!wrs.com!gnn
From: gnn@wrs.com (George Neville-Neil)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: Networking problems... No buffer space for sendto.
Date: 11 Feb 96 21:32:29 GMT
Organization: Wind River Systems, Inc.
Lines: 143
Message-ID: <gnn.824074349@wrs.com>
NNTP-Posting-Host: loire.wrs.com
Hi Folks,
I've just installed FreeBSD 2.1 on my WinBook (486DX/33 laptop
with 16M/340M) and I'm having some problems with the networking. I
can bring up the network and mount NFS volumes over it. BTW The
network card is a 3COM 3C589C Combo PCMCIA card. After a while the
network connection hangs/goes away. I can't ping the machine from
outside, and when I try to ping to the outside from the console I
get a "sendto: no buffer space" error. Anyone else seen this?
I've included the MINION kernel config file at the end of this
message.
Thanks,
George
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident MINION
maxusers 10
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
#options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on wd0
controller isa0
#controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#device wcd0 #IDE CD-ROM
#controller ncr0
#controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller ahc1 at isa? bio irq ? vector ahcintr
#controller ahb0 at isa? bio irq ? vector ahbintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
#controller scbus0
#device sd0
#device st0
#device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
options XSERVER # include code for XFree86
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device lpt2 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
--
George V. Neville-Neil work: gnn@wrs.com home:gnn@netcom.com
NIC: GN82
This signature kept blank due to the CDA.