Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.bhp.com.au!mel.dit.csiro.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.cis.okstate.edu!news.ksu.ksu.edu!news.mid.net!newsfeeder.gi.net!newsfeed.internetmci.com!in2.uu.net!newsfeed.ACO.net!fuw.edu.pl!news.nask.org.pl!usenet From: mburczyk@ternet.pl (Maciej Burczyk) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Intel EtherExpress Pro/10 Date: Fri, 23 Feb 1996 02:39:52 GMT Organization: Research and Academic Computer Network Lines: 18 Message-ID: <4gj9oi$oa0@bilbo.nask.org.pl> NNTP-Posting-Host: s110.maloka.waw.pl X-Newsreader: Forte Free Agent 1.0.82 Hi, I am having problems in configuring an Intel EtherExpress PRO/10 board to work with FreeBSD 2.1. The card is set to I/O 0x300 and IRQ 10 (PnP is disabled). During boot I can see a message "ix0 device not detected at 0x300". I have checked the FAQ where I only found that the driver for this card is planned to be rewritten. The card works well with Windows 95 in the machine (using the same settings). Any suggestions would be greatly appreciated. Regards, Maciej Burczyk