*BSD News Article 63560


Return to BSD News archive

Newsgroups: comp.unix.bsd.freebsd.misc
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!newshost.nla.gov.au!act.news.telstra.net!psgrain!charnel.ecst.csuchico.edu!newshub.csu.net!news.Cerritos.edu!news.Arizona.EDU!math.arizona.edu!noao!ennfs.eas.asu.edu!gatech!newsfeed.internetmci.com!uwm.edu!math.ohio-state.edu!magnus.acs.ohio-state.edu!csn!news-1.csn.net!alisa.org!wjjr
From: wjjr@alisa.org (John J. Rushford)
Subject: Re: gettytab settings?
X-Newsreader: TIN [version 1.2 PL2]
Organization: My place on the Front Range.
Message-ID: <Do2I06.M52@alisa.org>
References: <Dnz5x2.B03@alisa.org> <4huo1f$1re@uriah.heep.sax.de>
Date: Sun, 10 Mar 1996 19:55:18 GMT
Lines: 24

J Wunsch (j@uriah.heep.sax.de) wrote:
: wjjr@alisa.org (John J. Rushford) writes:
: > 
: > I've just recently installed FreeBSD 2.01.  I've noticed that when I dial
: > into the machine remotely that 'vi' and 'tin' don't work very well at all.
: > Even a long listing over the dialup is screwed up.

: You need to turn on hardware flowcontrol (CTS/RTS) on both, your
: computer and modem.  For FreeBSD, see /etc/rc.serial.

You're absolutely correct.  I've turned on hardware flow control and this
cured the problem.  I used 'stty crtscts'.  I'll check out /etc/rc.serial.

: -- 
: cheers, J"org

: joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE
: Never trust an operating system you don't have sources for. ;-)

thanks for your help J"org

John Rushford
wjjr@alisa.org