Return to BSD News archive
Newsgroups: comp.unix.bsd.freebsd.misc
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.mira.net.au!yarrina.connect.com.au!news.mel.connect.com.au!munnari.OZ.AU!spool.mu.edu!howland.reston.ans.net!newsfeed.internetmci.com!news.dacom.co.kr!usenet.seri.re.kr!news.imnet.ad.jp!wnoc-tyo-news!rena!ares!tokyonet.ad.jp!wincgw1!senri-nc!odins-suita!odins-toyonaka!ipcatm01!tenjn02!tcn02!tcn02!fa40309
From: fa40309@edu.kutc.kansai-u.ac.jp (INTEL OUTSIDE)
Subject: [Q] How can I set up LAN
Message-ID: <FA40309.96Mar17030814@tcs01.edu.kutc.kansai-u.ac.jp>
Lines: 108
Sender: @
Nntp-Posting-Host: tcs01
Organization: KANSAi-Univ. TAKATSUKI-Camps.
Date: Sat, 16 Mar 1996 18:08:14 GMT
Hello,
I have two AT machines (pentium 120, 32MB ram, 3G HDD) and FreeBSD
inside. I am trying to set up a LAN in my house. Ok, I tied many times
but I am not possible to connect the other host. Please help me.
Here some config files...( of a host named LISA, other host is named
AGNUS, but the config files are both the same but IP's)
==== /etc/sysconfig ====
hostname="lisa"
defaultdomainname=NO
tcp_extensions=YES
network_interfaces="de0 lo0"
ifconfig_de0="inet 192.168.1.2 -link2 netmask 255.255.255.0"
ifconfig_lo0="inet localhost"
static_routes="multicast loopback"
route_multicast="224.0.0.0 -netmask 0xf0000000 -interface ${hostname}"
route_loopback="${hostname} localhost"
defaultrouter="NO"
routedflags="-q"
namedflags="NO"
gateway=NO
gated="NO"
I must use the option "-link2" because the HUB I'd bought was for
10baseT,and the Ethercard from DEC was for 100/10BaseT.
==== /etc/networks ====
a-network 198.168.1.0
a-netmask 255.255.255
==== /etc/hosts ====
127.0.0.1 localhost.a.co.jp localhost
192.168.1.2 lisa.a.co.jp lisa
192.168.1.1 agnus.a.co.jp agnus
I tried some commands:
==== arp ====
lisa# arp -a
lisa#
=== netstat ====
lisa# netstat -rn
Routing tables
Destination Gateway Flags Refs Use Netif
Expire
127.0.0.1 127.0.0.1 UH 1 0 lo0
192.168.1 link#2 UC 1 0
192.168.1.2 127.0.0.1 UGHS 0 0 lo0
224 link#2 UCS 0 0
What means the "link2" ??? Where is the de0??
lisa# netstat -ai
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs
de0 1500 <Link>00.00.f8.01.5d.6b 1 0 3 2
0
de0 1500 192.168.1 lisa.a.co.jp 1 0 3 2
0
lo0 16384 <Link> 0 0 0 0
0
lo0 16384 127 localhost.a.co. 0 0 0 0
0
sl0* 552 <Link> 0 0 0 0
0
tun0* 1500 <Link> 0 0 0 0
0
lisa# ifconfig de0
de0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:00:f8:01:5d:6b
PING agnus.a.co.jp (192.168.1.1): 56 data bytes
ping: sendto: Host is down
ping: wrote agnus.denet.co.jp 64 chars, ret=-1
ping: sendto: Host is down
ping: wrote agnus.denet.co.jp 64 chars, ret=-1
^C
8 packets transmitted, 0 packets received, 100% packet loss
------------------
The LAN is full LOCAL, that means I have no gateway to connect Internet.
LAN
______________HUB______________
|de0 |de0
host agnus host lisa
Please help me, is there any mistake in my config files?
Thank you very much.
--
__
Call /// KANSAI UNIVERSITY - FACULTY OF INFORMATICS
YOUTHANASIA __ /// fa40309@edu.kutc.kansai-u.ac.jp < KEN TAKEDA >
MOTOROLA - \\\/// ...always remember...AMIGA rules 4-ever!!
inside BBS \XX/ YOUTHANASIA +81 - (0)726 - 93- 1708