Return to BSD News archive
Newsgroups: comp.unix.bsd.freebsd.misc Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.uwa.edu.au!disco.iinet.net.au!news.uoregon.edu!news.dacom.co.kr!usenet.seri.re.kr!news.imnet.ad.jp!wnoc-tyo-news!news.iij.ad.jp!iijnet!tyd0.tydfam.iijnet.or.jp!usenet From: ken@tydfam.iijnet.or.jp (Takeshi "Ken" Yamada) Subject: Q) Hayes ESP configuration Distribution: comp.unix.bsd.freebsd X-Newsreader: September Gnus v0.18/Emacs 19.30 Sender: ken@tyd1.tydfam.iijnet.or.jp Nntp-Posting-Host: tyd1.tydfam.iijnet.or.jp Lines: 34 Organization: Takeshi "Ken" Yamada Family Net Message-ID: <vtd95kpeue.fsf@tyd1.tydfam.iijnet.or.jp> Date: Sun, 7 Apr 1996 09:23:37 GMT Could anyone teach me how I should configure my kernel for using Hayes ESP Communication Accelerator? I tried default setting of the board, (0x300 port and irq 5? ) and kernel configuration "device sio2 at isa? port 0x300 tty irq 5 vector siointr", but the /var/log/messages gave me the following message. : : : : /kernel: ed0: address 00:c0:df:43:52:42, type NE2000 (16 bit) /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa /kernel: sio0: type 16550A : ESP slave esp_port has com 3 /kernel: esp_port has com 3 /kernel: /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa /kernel: sio1: type 16550A esp_port has com 0 /kernel: esp_port has com 3 /kernel: esp_port has com 3 /kernel: /kernel: sio2 not found at 0x300 /kernel: sio3 not found at 0x2e8 : : : : Do I need to initialize the card with Win3.1 utility so that I can use irq 5? If so, sigh!! Thank you for your help in advance. ken@tydfam.iijnet.or.jp PED00213@niftyserve.or.jp Takeshi "Ken" Yamada