*BSD News Article 6717


Return to BSD News archive

Newsgroups: comp.unix.bsd
Path: sserve!manuel.anu.edu.au!munnari.oz.au!uunet!wupost!gumby!destroyer!cs.ubc.ca!unixg.ubc.ca!kakwa.ucs.ualberta.ca!access.usask.ca!ccu.umanitoba.ca!mona.muug.mb.ca!gremlin!draco!root
From: root@draco.bison.mb.ca (Dave Rose)
Subject: [386BSD] Getty & 8 Bits. [Q]
Organization: The Draco Unix System, Winnipeg, Canada
Message-ID: <1992Oct17.171244.3918@draco.bison.mb.ca>
Keywords: getty 8 bits
Date: Sat, 17 Oct 1992 17:12:44 GMT
Lines: 32

Hello,

	I've seen countless requests about problems that people are having
with getty etc...and I've had mine too, in fact I still do...Ok...here's
where it sits with me.
	I couldn't get the getty that comes with 386bsd to work properly
to save my life. BUT, once I installed the cgd.com patches and set it up
so that I had bi-directional ports, 8096 worth of com-buffer, and set
the TRIGGER value inside com.c to 4 instead of 14, I noticed that the
damn thing actually worked...well almost. My ZyXEL 1496E works like a 
charm at 38400. My 2400 Smart One Hayes compatible, isn't fairing so
well though. I have it set up with no echo, no response codes, track
dtr and cd, and I'm using the 'A' line in the /etc/gettytabs file, the
one that is supposed to autobaud. Well, when someone calls, the modem
just spits garbage at them and then turfs them. Now what's funny is that
if they call back like 2 times more, things are fine. I thought that it
might be that the getty was picking up a high CD before there was actually
one there, so I bumped up the S9 register to 20, but this still hasn't 
fixed it.

	My question is this. Has anyone got a solution for my above problem?
I might also note that the 2400 line is 7 bits, but the ZyXEL seems to be
fine at 8 bits. Both have similar gettytab lines. Also, has anyone successfully
ported a "smart" getty for 386bsd? That they use and WORKS? And has anyone
got a clue on this 8 bit port problem?

	Lots of questions here, but I sure hope one of the main GURUS
could shed some light on the problem.

Thanks in advance.