Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!newsfeed.direct.ca!nntp.portal.ca!van-bc!unixg.ubc.ca!aurora.cs.athabascau.ca!sgigate.sgi.com!uhog.mit.edu!news.mathworks.com!newsfeed.internetmci.com!newsreader.sprintlink.net!news.accessone.com!news From: mwhitley@borg.proceon.com (Mike Whitley) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: tw0 driver for xten Date: 4 Jun 1996 04:44:26 GMT Organization: Proceon Systems Technology Group Lines: 24 Message-ID: <4p0eva$p7s@news.accessone.com> References: <4olmro$2kl@news.accessone.com> <31AF7C29.410A@fsl.noaa.gov> NNTP-Posting-Host: borg.proceon.com X-Newsreader: knews 0.9.3 In article <31AF7C29.410A@fsl.noaa.gov>, Sean Kelly <kelly@fsl.noaa.gov> writes: >Mike Whitley wrote: >> On boot up I consistently get tw0 not found at 0x378. >> Anybody have any hints? > >One word to summarize my experience with the tw0 driver: TERRIBLE. >... Sean - Thanks for the info. I'll look at the Lynx. I'm thinking about porting some code to use one of my CP290s under FreeBSD, has anyone already done this? (ie. I don't necessarily need to receive X10 signals). As for the TW523 have many people actually had success building the cable and using the tw0 driver? I guess Gene Stark must have done it...Is he accepting E-mail etc.? Does he have any suggestions on a parallel card? Thanks again, - Mike --